Hi fellow engineers.
Just a quick question. What's the quickest way to do gas rate on the new smart meters with the numbered keypads on....
I know they're a pain but anyone with info would be much appreciated..
Thanks.
Before we start, a few quick reminders:
Two of these have now gone, to AtouchofGas and Solutions. Three more to go.
No change there. Top guys.
Smashing freebie! How do you get one?
Simple eh?
Next step is:
And this week's question is:
How long was the warranty on the ECO-RF range...
Hi
I was just wondering if anyone has some guidance on running water pipes near the gas and electric meter.
They are fixed on a wall ( not boxed in) in a cupboard under the stairs. The gas meter is dangling unsupported from its pipes! I think i will carefully put a support block under it. I...
Hello, new to to the forum... I am considering doing a Plumbing course with new career skills. The course lasts for 18-24 months and costs about 6k. You spend a total of 5 one week blocks in the workshop combined with home learning (theory) and at the end walk away with BPEC water supply reg...
As a new user of this site I posted the following in an existing CH thread but I think it is of interest to any CH installer, so here it is again.
I'm a householder with a new CH system with JG Speedfit plastic 'barrier' pipe installed under the suspended floors. Only 8 weeks after start-up we...
Hi
We have just had a new megaflo system installed, approx 6 weeks ago. We are at a loss as to what to do. There is a noise when the taps/shower/bath/kitchen tap is turned on first thing in the morning or first thing in the afternoon once the water has been done. This noise is very loud and...
Hi There
I have a potterton system boiler. I bled a rad and now have no pressure, can anyone tell me where I attach the filling loop hose
The two pipes under the boiler with the plastic valves on them have been capped are different sizes - is this unusual ?
There is a third capped pipe...
I wondered if anyone would like to share their experiences of upgrading the mains water pipe to their property. Mine still has the 1902 lead pipe (is it likely this is old 3/4 inch?) and I think an upgrade would improve the flow rate. Last year I did away with the tanks and went in for direct...
Firstly great site!!
I am a 45 year old time served mechanical engineer, I am self employed as a plumber( bathrooms and kitchens)/plasterer/tiler( wet rooms )/welder/mechanic/etc.
THIS IS MY FIRST POST, SO HERE GOES!!
My parents boiler is an Ideal HE24, was fitted with a grant in 2007, been...
What's the best way to seal a S/S inset kitchen sink?. I know this is possibly a basic Q, but I'm getting lots of different answers. I'm keen not to get any leaks and blow the worktop!
The sink came with some form of putty strip, that I've managed to damage by fitting sink and then pulling out...
Hi all,
I'm hoping someone can advise on the best way to insulate and box in some external central heating pipework. Don't ask why the pipes run outside, I don't even know myself, the plumber told my parents it had something to with not being able to drill through a lintel. Anyway it's done...
as the title says, my parents want me to balance their heating system as some of the radiators are not as warm as others, so just wondering what thermometer you guys use to do your balancing, dont want to go out and buy a differential one just yet as they are £140 on ebay and cant justify it for...
Just reading a bit about it in the monthly mag, I have an old 1920s house that has an old myson Apollo and gravity hot water...
no insulation, or double glazing with me being a landlord if I got an assessor out.... Would the works sThat got carried on, simply go onto the tenants fuel bill ...
Hi,
I've just noticed a possible problem, which may or may not have been happening for some time....
When our heating / hot water system comes on, after a short time water starts coming out of the header tank overflow. There is quite a bit of water - I can see this as it flows onto a flat...
I am replacing a standard radiator on a combi boiler central heating system with a modern reproduction of an old style 4 column radiator. It states that the bleed valve MUST be on the side opposite the feed but most advise I can find states it doesn't matter. I don't know yet which side is which...
I have a Seimens RWB9 programmer but have lost the programming instructions, can anyone copy them to me or tell me where I can download them. I have searched the web and only found one (american) source which was as expensive as the timer originally. Many thanks.
I am looking for advice on what would be the best, not necessarily the cheapest,
combi boiler to have installed. I live in a 3 bed semi and want to replace the
existing boiler to create space and hopefully save some money in energy costs.
The existing boiler is a Potterton Netaheat 16-22...
I have just had a Combi Gas WB 30CDi boiler installed. I would like to understand how it works; e.g.
1. How does it heat both domestic and central heating.
2. Does it have two boilers.
3. How much water does it store and keep heated internally.
4. Does it turn off the central heating when the...
One question we usually get asked is “What analyser should I get?”
It’s purely down to the individual. What are you planning to use it on? Oil? Gas? Cookers? Do you want to print off your results immediately or store them to print later? Would you be looking to use it to do tightness testing...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.