Search the forum,

checked

Checked baggage is luggage delivered to an airline or train for transportation in the hold of an aircraft or baggage car of a passenger train. Checked baggage is inaccessible to the passenger during the flight or ride, as opposed to carry-on baggage.
This baggage is limited by airlines with regard to size, weight, and number, usually dependent upon the fare paid, or class of ticket. Baggage exceeding the limits is regarded as excess baggage.

View More On Wikipedia.org
Recent contents Top users
  1. G

    Domestic issue ;-)

    OK so have a intangible issue with a domestic CH system. CH & HW controlled by timer, 3 way motorised valve, room and cylinder thermostats. The boiler works fine and efficiently heats the hot water on the cylinder thermostat calling. But the central heating will not work. Checked the...
  2. M

    Really badly choked up boiler

    I went to an 18 month old Grant vortex combi 26 which was the worst i've ever seen to the point that the baffles had an inch of soot on top of them and when I pulled the swirl baffles out they were solid with soot. I cleaned it all out so it was sparkly clean changed nozzle etc etc I was...
  3. D

    drain gully headache

    The gully that my kitchen sink, dishwasher and rainwater runs into is blocked. It happened about 6months back and a bottle of melt cleared it. A whole bottle of one shot hasnt done squat this time, neither has a healthy dose of frantic plunging. Ive checked further down and no visable blockage...
  4. P

    Prostel cylinder noise bugging me!

    Have fitted an unvented cylinder, when up to temperature and you open a tap the pipe work vibrates and is noisey! Have tried loads of things and am starting to think it could be simply the tap, haven't checked yet. Any one had a similar problem or ideas it might help, think its over pressurising...
  5. D

    Advice needed - expansion vessel charge

    Hi there, was just looking for a bit of advice about my expansion vessel. My have a Suprima condensing boiler with expansion vessel - filling loop. The system loses 1 bar of pressure in 12-14 days. I have checked thoroughly for leaks and can't find anything, even a small one. I thought I would...
    • Davedon
    • Thread
    • advice charge checked expansion expansion vessel needed pressure system vessel
    • Replies: 2
    • Forum: Plumbing Jobs | The Job-board
  6. B

    Mains Supply Advice

    Hi all, My first post is a bit of an arduous one, but hopefully someone can offer me a little advice! We moved into our house about 4 months ago and the water flow was really low. Three separate plumbers all suggested that Thames Water should replace our external stopcock. They have finally...
  7. M

    LLGSC multiglow fire quastion

    Hi, guys Multiglow fire type Genesis instruction: burner pressure 18.7mbar, net heat input 6.3Kw. just one test point between valve and burner. I checked burner pressure was 20mbar and I adjusted, now is 18.7mbar ok but I checked gas rate and is 4.4kw burner blocked? operating pressure on meter...
  8. Robert Tyrrell

    New burner

    OK - I have to admit it - having a 'Long' break from all this stuff is really causing me headaches and I need some help :) I have a customer that has a Trianco Eurostar 100/125 external oil boiler (C2008) and I cannot get the burner to work. I have managed to determine that the control box was...
  9. Riley

    Wireless stat problem

    Any thoughts guys. Called out to a Siemens wireless stat this morning where signal is not reaching boiler. Boiler is a Biasi SpA if that has any bearing. Checked all wiring and that receiver and stat have power - both ok. Is this likely to be a boiler problem or a stat problem as I think...
  10. K

    Fault with radiator

    Hi guys, looking for some help got problems with my mums heating, I'm more from a commercial background so I need advice Basically she had her garage converted and a radiator fitted a few years ago. The person who fitted it tapped into the flow and return at the boiler. She has a calorifier...
  11. K

    an unloved boiler.....12 year old never been serviced or checked but passes lgsc

    think some remedials required here............... this boiler is still in use. think it needs some loving pmsl
  12. L

    Riello RDB Oil Pump Problem?

    Hello all this is my first post and am a big fan of the forum I Fitted a New riello rdb pump aprox four weeks ago to replace one that was leaking oil, was phoned and told that now 4 weeks on the burner is making a screetching noise. checked out the motor and pump, and it would seem the new 4...
  13. G

    programmer restarts when DHW and CH on together ?

    Hi all, I've got an odd issue with the central heating in our home. When the programmer is set to have CH and HW on at the same time, the programmer keeps switching off then on again (in the order of HW off first, then CH, then both back on). The cut out only lasts for about a second, but occurs...
  14. T

    Triple control thermostatic shower valve

    Hi I have recently bought and fitted a triple control concealed thermostatic shower valve. I put it all together like it explained on the installation guide but the problem I am getting is that out of the 3 handles I have only the hot seems to work individually and not the cold? Any Ideas how...
    • too hot to hand
    • Thread
    • checked cold control heating hot mixer please problem shower shower valve thermostat thermostatic valve
    • Replies: 8
    • Forum: Plumbing Jobs | The Job-board
  15. A

    Promax 18 sl over heating issue.

    Hi Guys, I'm looking for a bit of advice/confirmation of what i think the fault is. got called to a promax 18 sl last week thats not firing up and going straight to dry fire.. the engineer before me diagnosed a PCB and i was just sent to fit it, alas this achieved nothing (not sure how he came...
    • ABGS87
    • Thread
    • boiler central heating system checked expect first issue promax thats
    • Replies: 2
    • Forum: Plumbing Jobs | The Job-board
  16. A

    Need to change a 3 port mid position acl lifestyle valve

    Basically, the hw is on but no ch... Tried manually moving the lever to mid position but it's stuck fast!! Iv checked the voltage of the wiring and it's got full power so it's definatly not the motor.. Think the valve has completely seized. Going to change the valve it's an ACL 679H34030L0. I...
    • Alrite-geezer
    • Thread
    • 3 port change checked honeywell mid position motor position valve
    • Replies: 26
    • Forum: Plumbing Jobs | The Job-board
  17. T

    worcester bosch si 30 combi

    hi, i am looking for help regarding a worcester bosch condensing boiler,all was fine untill today when all of a sudden the blue light went out and no power,checked main fuse this is ok,checked and replaced the other 3 fuses in the electrics behind timer ,still no power any ideas or tips would be...
  18. T

    Air Source Heat Pump question - please help!

    Hi there, I'm due to start renting a new build house this week and have been allowed in for the past few days so we can move our stuff in. It's a four bedroom detached house with an air source heat pump system, which I have absolutely no prior knowledge of whatsoever. There's also solar for the...
    • thebeefchief
    • Thread
    • air checked heat heat pump heating help light please pump question source water which
    • Replies: 0
    • Forum: Plumbing Jobs | The Job-board
  19. B

    one of those wks glowworm betacom a

    fitted a betacom 28a about 5 months ago and got called back to it today due to poor ho****er - checked at taps only 39degrees with tap on full flow or low flow . water temp set at 60 - 14 degres across plate - flow 73 rtn 56 on boiler . checked fan target and actual values which were ok . inlet...
  20. RGII79

    Anyone using ideal logic systems

    I have a problem with a 3 week old logig system 18 intermittant leak inside boiler casing checked blow off and not passing aav ok and all seals seem ok but pressure not above 1 bar and 3 calls since install saying leaking from rubber gromit elec cable bottom of boiler. unsure whether H...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Contractor Talk
Tiling Advice
Tiling Tools
Tilers Forums UK
Electrical Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock