I am gas engineer and I have recently applied for my own gas safe registration. I received a letter explaining my local inspector will be visiting me. Could someone please go through there experience when visited by the inspectors. I don't know what they're like but I am not looking forward to...
Hussaia26
Thread
before
gas
help
inspection
please
pressure
servicing
they're
you're
Fitting a bathroom for a custard she has just called to say bath is damaged.
Im always massively careful with baths since damaging one when I first started out so I'm 1000000% positive I've not damaged it.
She obviously has signed with the company that delivered to say that bath was perfect...
Hi guys, can anybody offer advice on the gas safety register. I am considering putting myself through the ccn1 course but it is quite costly (£1200). I have worked with domestic gas before with a previous employer but my only worry is getting enough experience after i complete the course. Has...
Fergy449
Thread
advice
course
gas
gas engineer
gas safe register
getting
gsr
included
price
register
safety
they're
had this email today
ATTN: THE MD/CHAIRMAN,
My name is S.Richard Austin, Singaporean; I am the survived bookkeeper of Mortgage & Security Company in Democratic Republic of Congo (DRC). I got your contact from international directory while searching for a trusted and capable businessman or...
Hi Guys
Is it only Saniflo who sells Saniplus spares? And do they sell to Jo public? (I've recently given up plumbing)
Oh, they're so lovely to work on! always wondered what it's like to be in the s..t! Now I know!
Pete
i have come across soooo many maintenance jobs where there are NO isolation valves fitted.
some jobs have NONE whatsoever so i have to turn off the main stopcock and drain the whole system down, some use cheap valves that last a year until they get furred up or just dam right stuck!, and...
MP plumb
Thread
always
fitted
isolation
plumbers
they're
until
valves
I need to practise bending and soldering but don't want to waste the pipe.
Then had a brilliant idea.
I need a stand for a couple of VCR players and a Sega Saturn. Yes I know they're old but I still use them and they're fun.
I was originally going to use 3/8" ply, then to hide the joins at the...
student plumber
Thread
bending
different
front
going
pipe
soldering
they're
thought
BG have been fined 2.5 million pounds for failling to deal with customer complaints, they have also started selling and installing renewable energy systems to customers, therefore must be MCS accredited, So my question is, are they a fit company to hold the MCS accreditation be assured by REAL...
Just about to notify my first boiler installation and on the notification page on the gs website it asks for details of appliance removed, specifying 'cast iron' or 'low water content' can someone shed some light on what this means or put it into idiots terms for a simple gas fitter like me :p
westyvip
Thread
about
appliance
boiler
gas
gas engineer
gas safe
gas safe register
gsr
removed
safe
they're
Im a new plumber and have a question for you, I now and again have to ease/adjust 15mm stopcocks as they have ceased, I usually just renew the centre tap part of the stopcock as it is easier, my method is to clamp the body of the stopcock with stilsons and use large adjustable spanner to remove...
Hi, I've got a baxi 105e heating seems to be fine, hot waters been better. But pressure
is rising to 3 bar, the pin on diverter body which actuates microswitch is weeping water.
Is this just simple diaphragm change or diverter valve. Thanks in advance RMBP
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.