Search the forum,

Discuss Aldi 18v combi deal today!!!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Blimey, that will make a good starter kit for an apprentice for that money, can't go wrong! Before they are let loose on your own expensive gear!!
 
See if you can find out who the warranty is with.

I bought a hand held inspection camera from Aldi - my wife bought it for me -
I opened it, thinking it would be the biggest heap of junk, only to find out it was made for/by
Rothenberger and warranty's are covered by Rothenberger.

It was about 1/6th of the price of a Rothenberger camera.

Can't compare the two - but it does work and work well
 
see if you can find out who the warranty is with.

I bought a hand held inspection camera from aldi - my wife bought it for me -
i opened it, thinking it would be the biggest heap of junk, only to find out it was made for/by
rothenberger and warranty's are covered by rothenberger.

It was about 1/6th of the price of a rothenberger camera.

Can't compare the two - but it does work and work well

3 years.
 
Anyone get one??

My daughter has bought her hubby a set for Christmas, I will let people know what they're like and who guarantees them when he's got them. He bought 18v B&D less than six months ago and now binned it.
 
My daughter has bought her hubby a set for Christmas, I will let people know what they're like and who guarantees them when he's got them. He bought 18v B&D less than six months ago and now binned it.

Had a look at this today and must admit it looks reasonable for the money, all metal front and feels nice in the hand, not too heavy and not flimsy either. Time will tell.....the warranty is covered through Walter Werkzeuge, a German company.
 
Status
Not open for further replies.

Reply to Aldi 18v combi deal today!!!! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
184
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
172
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
161
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
3
Views
199
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
122
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock