Search the forum,

bypass valve

A blow-off valve (BOV), dump valve or compressor bypass valve (CBV) is a pressure release system present in most turbocharged engines. Its main purpose is to take the load off the turbocharger when the throttle is suddenly closed.

View More On Wikipedia.org
  1. B

    automatic bypass valve install

    need to fit an automatic bypass valve on an s plan 2 valve system as one was never fitted also pump overrun was not working as who installed this never put a separate feed mains to boiler and separate live demand from the wiring centre ,pump overrun now works but bypass needs fitting asap...
  2. M

    Help with boiler cutting out to early and bypass valve

    Hi, My boiler is cutting out before my rads are getting properly hot. Im 99% sure its the "water thermostat" doing its job and cutting out as the water temp gets up to max heat as the feed pipe is boiling hot but the return is only luke warm. It does restart itself once the water cools down and...
  3. A

    Best position for automatic bypass valve

    Hi all, I'd like to install an automatic bypass valve on my central heating system. It's a pressurised system using a Worcester Greenstar 27 CDI combi boiler. I have a few questions: 1) Apart from the obvious (that it should be between the feed and return pipes of the CH) are there any...
  4. G

    Cant find 15mm bypass valve

    Hi Need to change bypass valve, cos it lets water through even it closed position. seems like knackered. I was looking a similar one but cant find 15mm bypass valve, All I can see on the market is 22mm auto bypass valves, so what kind of bypass valve I need to replace it with? and is there...
  5. M

    Noisy automatic bypass valve?!?

    Hi. I have a sealed system with 3 2way valves for HW, upstairs CH and downstairs CH. The ABV whistled when downstairs heating was on. Plumber by chance twiddled with ABV which stopped the whistle. Now ABV and noise around that loop is incredible noisy, can be heard throughout the whole house...
  6. S

    Bypass valve part

    Please could somebody tell me what the tee connector valve is called so I can order 2 to make up the bypass valve. Thank you.
  7. @

    Two questions about a bypass valve

    I have a central heating system with two zone valves, one for the hot water circuit and the other for the radiator circuit. I have a bypass valve installed between the flow after the pump and the return to the boiler. In case it helps, the bypass valve is a Taconova AV23 SETTER Inline with a...
  8. M

    Does a Closed Central Heating system need a Bypass Valve open?

    HI All, Quick question, had problems with our central heating system, with some radiators not heating up properly. Finally mapped it all out and found that hotel water come from the boiler and through the pump, then there are 3 options: 1) Branch off Through Central Heating control valve to the...
  9. T

    Noisy bypass valve

    I have an s plan system with an unvented cylinder and a radiator circuit. For the last month or so, when the 2 port valves shut, but the pump overrun is still running, I hear a vibrating noise coming from the bypass valve / AVDO. It sounds like water struggling to get through the valve/...
  10. Robert Tyrrell

    Automatic bypass valve?

    I need to ask what is essentially a know, or don't know in my case, question: During the process of fitting an S plan heating system, is it a legal requirement under the building regs to fit an ABV or can you leave a rad in the presently on position? If so, where does the ABV get fitted - I'm...
  11. D

    Do I need a bypass valve or not ?

    I'm just about to convert my CH system from Y plan to S plan. Currently I just have a 15mm gate valve bypass in the airing cupboard and that is shut as I don't have TRVs on all rads. The guy who installed my boiler said that was fine, just open it enough to hear a bit of water flowing. However...
  12. A

    Setting Honeywell DU145 Auto Bypass Valve

    Good afternoon, I'd appreciate a quick bit of help. I had new hot water tank, central heating pump, controls etc. installed last Nov; I kept original boiler for now. I did a lot of research into the products I wanted in my system; found a good plumber through people I know that have had work...
  13. I

    New boiler - Radiator valve fitted instead of bypass valve - is this legit ?

    Hi I have recently had a 24Ri boiler fitted to an older system It needed a bypass valve fitting to allow the pump to run on after the boiler is turned off to help the boiler cool down Instead of a differential bypass valve, the plumber has fitted a radiator valve, (opened 2 turns out of 4.5)...
  14. N

    auto bypass valve required and location

    Hi guys.. i'm after a little advice / guidance with regarding the need for an auto bypass valve. The current system was installed by myself aprox 7/8 years ago under the guidance of a local gas fitter - who also installed and commissioned the boiler. Back to back terrace 42 m2 total floor...
  15. N

    Bypass Valve passing

    I have recently had a new Boiler fitted, it required an Auto Bypass Valve to be fitted. A Honeywell DU145 was fitted and left on setting 1 it was open all the time. The plumber said it could not be set until all the new Radiators had been installed. The system is on an S plan with 2 valves so at...
  16. D

    Location of bypass valve

    dear all with a combination boiler is it required to put a by pass valve anywhere on the flow and return pipes anywhere on the system? Or is there a bypass valve integrated within the combination boiler? Any feedback would be great.
  17. D

    Is this a bypass valve?

    Hi all, I'm trying to learn the basics of my heating system. I've stuck my head inside my airing cupboard, and am trying to identify the different components. I'm wondering what the circled component is in the picture below. I've looked at schemas of heating systems that I've found online...
  18. H

    Auto bypass valve not closing

    I Have just had a new Worcester Greenstar 40CDi Conventional boiler fitted retaining the old Grundfos Super selectric 15-60 pump, set to 3.(P1W ;105). Three heating zones plus HW. The new bypass valve looks like a Honeywell DU145 but has a yellow, not red, knob. By feeling the temperature of the...
  19. G

    TRV's Do you need to fit an automatic bypass valve as well, help needed please.

    Hi Guys, Need you're expertise please. My heating system is very basic I don't have a termostat, all I have is a knob on the boiler to turn the heat up on the water. This was a problem as in the morning I needed the heating on but also the hot water for a shower. But because the central...
  20. D

    Automatic Bypass Valve Position

    Recently, we had a new Alpha 24R condensor boiler fitted. The pump and two motorised valves (S-plan) are located in the airing cupboard next to the hot water cylinder. I have noticed that the CH engineer has fitted an Automatic Bypass Valve (Honeywell DU145) directly across the CH motorised...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock