Search the forum,

airlock

An airlock, air-lock or air lock, often abbreviated to just lock, is a compartment with doors which can be sealed against pressure which permits the passage of people and objects between environments of differing pressure or atmospheric composition while minimizing the change of pressure in the adjoining spaces and mixing of environments. The lock consists of a relatively small chamber with two airtight doors in series which do not open simultaneously.
An airlock may be used for passage between environments of different gases or different pressures, or both, to minimize pressure loss or prevent the gases from mixing.
An airlock may also be used underwater to allow passage between an air environment in a pressure vessel and the water environment outside, in which case the airlock can contain air or water. This is called a floodable airlock or an underwater airlock, and is used to prevent water from entering a submersible vessel or an underwater habitat.
Air-locks are used in space flight, saturation diving accommodation, hyperbaric chambers, submarines, some underwater habitats, cleanrooms, and pressurised caissons and tunnels. Depending on the pressure difference, when people use an airlock to transfer from higher to lower pressure, it may be necessary to follow a decompression schedule to avoid decompression sickness. A similar arrangement may be used for access to airtight clean spaces, contaminated spaces,or unbreathable atmospheres without necessarily having a pressure difference. In these cases a decontamination procedure and flushing takes the place of pressure changes.
The procedure of entering an air-lock, sealing it, equalising the pressure, and passing through the inner door, is known as locking in. Locking out is to unseal the outer door after equalising pressure and exit the lock compartment to the ambient environment. Locking on and off refer to transfer under pressure where the two chambers are physically connected or disconnected prior to equalizing the pressure and locking in or out.

View More On Wikipedia.org
Recent contents Top users
  1. C

    Shower Pump or Airlock

    Good morning All, I am looking for some assistance if I may. Over the past 3 weeks the shower has not been operating correctly. Our shower is downstairs and the Mira pump PPT3 is upstairs. When operating the value on the shower to cold the pump works normally and sounds normal. When changing...
  2. P

    Making a hose for clearing airlock from radiator

    Hi, I got some useful hints with my first post last year so I’ll have another go. It seems I have an airlock so I'm looking to have a go at the method shown in this video from plumberparts: I’m just trying to imitate his hose on the budget. I can see he's got the hose clipped onto a metal...
  3. D

    Powerflush and airlock issue

    Hi, I am a home owner and after some advice on powerflush and airlock issue. Recently I found most of radiators bottom not warm enough in my bungalow, then a plumber was called in, he tried chemical flush for few weeks but no effect. He then did a powerflush. 2 days later, the heating has not...
  4. T

    No cold water in the upstairs bathrooms possible airlock

    Hi Guys I'm after some advice. Last weekend out cold water taps in the 2 bathrooms upstairs started to drizzle then the water completely stopped. Called out a plumber, whos said there was an airlock. He did something under the kitchen sink which then seemed to bring the water back. Also replace...
  5. M

    Airlock in cylinder coil of Evinox (RC15) boiler - How can I release it please?

    Hi, I live in a flat and have an electric Evinox Heat Meter Modusat Model RC15 Boiler. I had a cold spot on a radiator and bled it. The boiler pressure dropped to 0.5bar. A red warning light came on on the boiler as well as on the wall mounted 'Evinox viewsmart' controller. I refilled the...
  6. M

    Airlock in Evinox (RC15) boiler cylinder coil - How can I release it pls?

    Hi, I have an Evinox Heat Meter Mod RC15 Boiler. I had a cold spot on a radiator and bled it. The boiler pressure dropped to 0.5bar. A red warning light came on on the boiler and on the wall mounted 'viewsmart' controller. I refilled the boiler back to 1.5bar. The warning light on the...
  7. N

    Real back airlock - exhausted all options...

    I fixed some leaking pipes from floor board nails - but replacing the damaged sections with new pipes and used compression fittings to join them together. Leakage fixed - but I now have a REALLY BAD AIRLOCK... - No CW in ground floor bathroom faucet or toilet cistern - HW good in ground floor...
  8. J

    Worcester Greenstar 24ri - Possible airlock?

    Replaced an old Ideal Concorde WRS225a with a 24ri today, on fire up it lights for couple of seconds and overheats causing banging pipes etc. Couldn't find a manual for the Ideal so assumed flow was on the left and return on right as left came out from top of heat ex and right from the bottom...
  9. Best

    Gravity cold constantly airlock

    I have came across a strange one I can't solve. Have been to a job probably 5 times over many months. This plumbing is original several decades old, without precious bother. The elderly couples toilet and cold bath tap stop flowing from gravity tank fed. First time I went I just quickly cleared...
  10. P

    Hot water airlock

    Hi, My name is Patrick, I've never posted before, I could really use some help, any suggestions anyone can give me would be much appreciated. Cylinder is on the first floor, first floor taps are getting airlocked pretty much daily. Homeowners are currently clearing the airlock by running a...
  11. 7

    Removing airlock in gravity fed pumped power shower

    Need to remove airlock from gravity fed cold and hot water fed pumped power shower. Is it ok to connect a hose to a mains tap and attach to mixer hose outlet and force mains water up through the cold side into c/w storage tank & repeat by switching mixer to hot? Is it fine to send mains water...
  12. D

    Boiler not firing up after refill.. help please.

    Hi there.. So, after flushing my boiler system to release what appears to have been an airlock in some pipework (had a very satisfying splutter and huge surge of black muck out of the drain valve) for my new radiator...(previous thread), I have today gone and bought some Central heating...
    • dougie212
    • Thread
    • after airlock boiler color firing help not firing oil please refill system
    • Replies: 13
    • Forum: Plumbing Jobs | The Job-board
  13. R

    Kitchen sink not draining. ? Airlock

    Help! I need some plumbing advice. 2 weeks ago our kitchen sink filled up with dishwasher water and wouldn't go down. After plunging (did not work, and broke the seal of the plug) and removing the pipes under the sink and putting a 6ft snake/spring (no blockage found) it was draining again...
  14. J

    Blocked pipe or airlock

    Hi, could anyone advise me on a radiator not heating up? I recently removed a radiator from the lounge (permanently) - when I refilled the system and tested the other lounge radiator wasn't working. I replaced both valves (TRV and lockshield) and the radiator still didn't heat up. I have now...
  15. S

    Airlock ? What have I done???

    Advice sought please...Last week I removed our our bathroom radiator and fitted on to the pipes, a heated towel rail. Made a good job of it felt really pleased! Had to drain down the radiators, fitted towel rail, then re-filled the system + inhibitor. Started central heating and bleed radiators...
  16. M

    Airlock in my hot water lead to the shower's digital processor

    Hopefully this all loads as I want it to, because the imagery (I think) makes all the difference. I seem to have come across a nasty airlock leading to my Aqualisa digital quartz shower pump that has completely stopped the flow of hot water. The unit literally craps out on me the instant I start...
  17. D

    Central heating airlock

    After changing some rad valves today I've had a nightmare airlock on the central heating. I've put it down to the position of the vent and cold feed as when the heating on the air has nowhere to go. I've drawn a diagram of the setup what do you think?
  18. U

    Slow bath cold feed, airlock or something else?

    Hey, i'm trying to get the bath in before tilers turn up, but the cold tap on the old bath was running really slow. I've since connected a flexi tap connector to the pipe to test and it is running pretty slow, i mean its not coming out like it does the taps in our other bathroom. I have drained...
  19. T

    Underfloor heating manifolod position

    A builder has asked me to put the ufh manifold in the basement which will then feed the ground floor (the pipes will all be above the manifold) I think that any manifold MUST go above pipe loops for air bubble/airlock prevention what say you guys????
  20. K

    Airlock in Hot feed pipes?

    Hi all I have problem with what I think could be trapped air in the pipe work of the hot feed at my mum’s house. About 10 seconds after turning on any of the hot feeds in the house a dreadful, loud groaning noise occurs in the pipe work, along with a fair amount of shaking / hammer I reckon...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbers Forum - Plumbing Advice
Electricians Talk
Electrical Advice | Electricians Blog
BS 5389 Tiling Standards
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock