Plumbingzone Forum

Plumbingzone Forum

Plumbingzone Forums

  • Thought id give a shout out to our next door any members of the Plumbing Zone forum are welcome here i always say register to all the forums and each one will bring you or your business something positive. So hello to all from plumbingzone.com.​ And contractor talk and electrician talk are other ones of […]
  • I have a CH circuit on a 2 way zone valve. It’s a long circuit with 15 rads on it but rather than shutting down the last 5 rads in the circuit when not in use which is 90% of the time, can I put a 3 zone valve on the flow after the tenth […]
  • Afternoon Fellas If anyone has time to help with this snag it'd be much appreciated. We have a wet-floor system controlled by John Guest UH3 and rather dated Heatmiser DT thermostats. One of the upstairs zones is combined for the bedroom/dressing room. So that's 2 rooms, 2 manifolds, but one thermostat (in bedroom). Just recently […]
  • Is there anyway of testing electrically with a multimeter or any other way. Of testing that when you turn a room stat up it is creating a demand and opening the zone valve? Thank you
  • We have UFH throughout downstairs. I have had one coil replaced. I have had the thermostats checked that they are linking to the correct actuators, which they are. the cupboard where the UFH system is gets hot when I turn up the thermostats in one or all zones. The boiler is coming on but the […]

Visit the Plumbingzone Forum here