Plumbing Jobs

Plumbing Jobs

Plumbing Jobs and Plumbing Work Forum Category. For all Professional Plumbers and Registered Gas Engineers Forum

  • Hi About 8 years ago the valve under the sink burst. Major flood. They capped the hot water pipe to the washer and apparently replumbed everything g else. Since then I had very low hot water pressure in kitchen through a single faucet double tap style tap with two flexi hose under the sink. I […]
  • Hi, I have just purchased a kitchen tap. I have extremely low water pressure and I'm having trouble finding a tap that actually gives me any water, particularly hot water. Anyway the tap I have bought says it is for low water pressure (MICOE HOME – KITCHEN SINK TAP – QHKF11) however when I opened […]
  • Hi All, I am a 16 year old school leaver (Sept 23) looking for a local company to take me on as an apprentice plumber. I live in Benfleet and am looking to join a plumbing and heating engineer 4 days a week whilst I attend College to gain my level 3 plumbing and heating […]
  • Hi All, Does anyone have experience with installing a Grundfos Scala 2 on to the water main in a large domestic? (2 showers, 2 baths, washing machine always on) Already has a 200l accumulator but we are looking at something to improve our 2.1bar to 3.5 in to the megaflow and to the garden tap […]
  • Hi all, I recently changed programmer to a Drayton lp112. Fitted by a registered plumber. Now when I select hot water only to come on the central heating comes on as well. Plumber saying last plumber at fault and wants £400 to rectify. Is it possible that he has wired programmer wrong and got wires […]
  • Hello all, We just finished renovating our house and there are some issues with the plumbing: that is, our shower has a terrible smell. During the renovation, we had a last minute change to move the toilet down the hall. Although it is a new renovation, we did clean it to make sure there is […]
  • Hi everyone, I've recently moved into a new property and had a lot of interference on our TV and Audio equipment, following advice I had our earth changed from PME to 8ft rod and it improved a lot but is still not perfect (the theory is the big factory located near our property is putting […]
  • A Drayton TRV4 radiator valve where the head part you turn to change the temp including the tubular pin has come away from the rest of the unit. It hasn't snapped, it looks like it's been pulled, we think it's just a case of re-assembling and putting back but the TRV4 may need replacing if […]
  • I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop
  • Tiffel 20-50 boiler will not fire up. Screen shows ambient temp approx 20 degrees with a symbol of a flame. Got the settings just for hot water.
  • I’ve never seen an unvented tank (or any tank) in the UK installed on a drip pan. This is pretty common in the US though. As someone who’s unvented tank in the loft leaked (through a cracked immersion element unit) and flooded a bedroom below it seems like a simple safety precaution… Is there some […]
  • Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if caused by us… There were […]
  • Hi all, Currently undergoing my level 2, hoping to get finished in the next few weeks. Looking to gain some experience, if anyone needs a mate etc. Im currently in the forces will be leaving in May however at the minute I can work Mondays/Fridays and weekends. Do not want paying just happy to receive […]
  • I am city and guilds trainees live in Dartford. I am interested in working with a professional plumbing to get more experienced in the weekend Looking for your cooperation
  • Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find […]
  • Good afternoon anyone on here doing a Plumbing pre-attendance Health and Safety test? That's impossible to pass. I failed it twice and have no feedback where I failed on. Thank you
  • I have posted a few times, mainly regarding my indecision to go for either an Ideal or an Intergas open vent boiler. Having taken note of comments here and having, today, visited [with my installer] a local Plumbase shop to see the area Representative/Contracts Manager displaying an Xclusive combi boiler I (we) have pretty much […]
  • Hi all, Looking for some advice as a previous posting suggested there are some people quite experienced with Gledhill system on the forum. I'm having an issue whereby when the hot water has been on and any hot water tap/shower outlet is opened, the hot water pressure is significantly higher than usual. It then returns […]
  • Hello guys. New to forum so first time posting. It might be a long shot, but due to huge increase in work I am looking to get other plumbers on board. Not sure if anyone be interested but I thought I would ask. I am fully experienced and equipped and been in the trade for […]
  • Hypothetical scenario; Trades on the job are plumber, electrician, plasterer and kitchen fitter. Kitchen has an integrated dishwasher. Plumber in 2nd fix fits cold isolation valve and provides waste pipe connection in unit next to dishwasher (under kitchen sink). Nothing had been specifically quoted for with regards to dishwasher installation. In a usual scenario would […]

For more Plumbing Jobs go to PlumbersForums.net