Search the forum,

tested

Tested is a live album by punk rock band Bad Religion. It was recorded in the USA, Canada, Germany, Estonia, Denmark, Italy and Austria, in 1996, and released in 1997. It is Bad Religion's second live album. Instead of using crowd microphones and mobile studios like most live albums, the band tapped the inputs, for a result that portrays Bad Religion's live sound without crowd noise. It also includes three new songs; "Dream of Unity," "It's Reciprocal," and the title track.

View More On Wikipedia.org
  1. S

    Can an uninstalled shower pump be tested?

    Hello all. Five years ago a new (undersized) shower water pump was removed after a few attempts to try and get it to work and a larger one was successfully installed. I’ve kept the original pump and am hoping someone might advise if it might work after all this time or more importantly , is it...
  2. P

    The HWC Mystery - only reaches 50c despite a tested thermostat...

    Background - One morning about two weeks ago I found we had hot water in the cold water tank, so I ran off the cold (now hot) water and let the cold tank refill to try and diagnose the reason. But the cold tank has stayed cold ever since after that with nothing coming back from the hot cylinder...
  3. M

    New boiler installed.

    Had a new Worcester Bosch 38 CDi fitted today. The installer ran the boiler through it's start up process and ran the boiler at a temperature of 90 degrees for nearly an hour. I was a bit shocked at this and was expecting the central heating system to blow up at any moment as we would normally...
  4. M

    How long after installing solvent weld waste pipe till can be tested

    How long after glueing solvent weld waste pipe, is it needed to set before can be tested? Pretty sure its only a couple of mintues or so.
  5. M

    Decreasing water pressure!

    Tested the static pressure at an garden tap, and it read 5 bar, but gradually decreased down to 2.5 bar within about 5 seconds. Tested this several times with different pressure gauges, and the same thing happened every time. No other taps were being used. Can anyone explain/suggest what may...
  6. T

    flue gas analyzer low co2 reading is low

    Hello, I hope someone can help. I’ve got Kane 455 FGA, its been serviced and calibrated the problem is that CO2 level is 2.3, 3.5 at most I could get 4.5, instead of 9-11, co co2 ratios are fine 0.0004 0.0009, co are fine as well 17 to 25. Recently I sent it back for recalibration but they dint...
  7. B

    GAS LEAK in existing 22mm copper pipe direct to boiler

    Apologies if this is in the wrong forum, but really after some advice with regards to the following We recently smelt gas in our boiler cupboard so i rang the plumber who fitted the boiler who tested with a gas sniffer to indentify where the leak was, we found a leak and the joint was replaced...
  8. Whn1

    Anyone used one of these?

    REGU80 Regin Pressure Test Kit Complete | eBay
  9. Z

    Glowworm Cxi F.12 fault

    I've been to have a quick look at my mate's boiler and its displaying F.12 which is 'Connection fault between main pcb and display pcb'. The boiler is not firing up. The wire itself seems ok, no obvious breaks/damage (have not actually tested yet). I've had a word with a couple of people and...
  10. S

    pressure test full ch system y plan

    how many of you have ever done the air pressure test to a full ch system ? me - never
  11. A

    Electric boiler question

    Hi, I have bought a flat with an electric boiler - the flat is all electric. The boiler is a Vented Cylinder My question is: 1. As this is not gas powered - do I need to service it? It is 10 years old, but looks OK and has been working fine 2. If I do need it serviced once a year -...
  12. G

    hot water firing boiler but cental heating is not

    Hi i have just tested my central heating system ready for the cold weather its a glow worm ultimate, the hot water works fine i press the 1hr button on the the programmer and it fires up, i tried it with the cental heating button but it doesnt fire up the boiler i have tested the room stat and...
  13. P

    Pressure drop on G4

    Hello wisemen, I have a little problem on this installation i went on to do a cp12. i found a pressure drop that was over the permissible limits. basically its a G4 meter connected to a boiler in 22mm and 15mm to cooker and i found a drop over 4mbar. the pressure kept on dropping slowly over a...
  14. B

    1.5 mbar drop

    Hi all I've been to an existing installation with two gas appliances; a combi and a gas fire. I found a permissable 1.5mbar drop when tightness testing but out of curiosty saw fit to investigate the leak. I isolated the gas tap underneath the boiler, tested again and no leak. I re-opened the...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock