You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
multi
In computing, multi-touch is technology that enables a surface (a touchpad or touchscreen) to recognize the presence of more than one point of contact with the surface at the same time. The origins of multitouch began at CERN, MIT, University of Toronto, Carnegie Mellon University and Bell Labs in the 1970s. CERN started using multi-touch screens as early as 1976 for the controls of the Super Proton Synchrotron. Capacitive multi-touch displays were popularized by Apple's iPhone in 2007. Plural-point awareness may be used to implement additional functionality, such as pinch to zoom or to activate certain subroutines attached to predefined gestures.
Several uses of the term multi-touch resulted from the quick developments in this field, and many companies using the term to market older technology which is called gesture-enhanced single-touch or several other terms by other companies and researchers. Several other similar or related terms attempt to differentiate between whether a device can exactly determine or only approximate the location of different points of contact to further differentiate between the various technological capabilities, but they are often used as synonyms in marketing.
Multi-touch is commonly implemented using capacitive sensing technology in mobile devices and smart devices. A capacitive touchscreen typically consists of a capacitive touch sensor, application-specific integrated circuit (ASIC) controller and digital signal processor (DSP) fabricated from CMOS (complementary metal-oxide-semiconductor) technology. A more recent alternative approach is optical touch technology, based on image sensor technology.
Anyone know of a wrap around pipe repair for 110mm? Just cut into a soil pipe while cutting out a boxing.
Don't really want to have to cut a coupler and slip coupler in.
Anyone using the Milwaukee multi tool if so what do you think. I’m looking into getting one how does it compair to a mains powered fein?
Kind of wish Milwaukee would release a new updated fuel version.
Any advice would be helpful. already got Milwaukee gear so not interested in other...
Hi
First thread so hopefully I am in the right place. I will try to give all the information as best I can, however please request more details if this request is lacking.
We bought a house about 4 years ago from a plumber. It contains the following heating inputs.
A 16kw boiler stove
A...
I have just had an extension completed with a separate UFH zone added meaning i have 1 zone for the radiators in the house and 2nd zone for the UFH.
Unfortunately it seems that when the UFH comes on it also turns the house radiators on too and they are uncontrollable meaning the house becomes...
Any recommendations for a gas powered multipoint water heater?
Need to quote to replace one, could s combi be used instead?
It's for a cafe and they currently have no CH
Hi all,
I'm in the process of upgrading my heating system my pro proposed plan below.
Move existing boiler into loft (ideal heat + 18)
Brand new kingspan tribune he 180l unvented indirect in loft next to boiler.
Every room on own zone 6 in total.
Nest gen3 in living room and dhw control...
My stove has been plumbed up to a thermal store without a vent. The plumber originally had one and the system didn't work by gravity so when he put the pump on to circulate the water it must have pumped out the vent and he just cut it off and blocked it. I got another plumber to look at it who...
Hi, we're a small firm with a a growing client list in the B2B sector, letting agents, property professionals & landlords. We need someone with a "can-do" attitude which for us, is more important than your experience or technical skill/ knowledge. You will be working in a reactive & planned...
I currently have a blue Bosch corded multitool, but as I am also an electrician I often find myself needing my multitool when I have no power.
I currently have the Milwaukee 18v sds, 18v hammer drill and 18v impact driver but the reviews I have read about the Milwaukee multitool don't seem to...
Hi was wondering if anyone could help me, I was at job today and there are two of the exact same fires in living room and dining room that has been made into one room as the wall has been knocked down to make it one big room. Both fires are under 7 kw, both have passed safety checks. I have...
hi all, we have just moved house to a 3 bed dorma bungalow with run of the mill combi boiler, we have a coalbrookdale darby stove which we'd love to put in but beforehand i would really appreciate anybodys feedback on these h2 panels and the rough cost, and any other requirements to the install...
Does anyone know where I can purchase a large diagram/label for a multi-meter installation room? Its the one where you have to write in the number of meters installed for a block of flats.
Evening all.
Anyone local to me fitting many baxi or potterton? I've got flue bits galore. Standard flues, plume kits, flue bends, extensions, stand off kits.
i'll swap the lot for a couple of good bottles of red vino.
first come first served and collection only!
Hi all, i have a main multi ff water heater. When running all is well for about 5 mins, then no hot water and red light flashes. I think it is a combustion air problem. I have check the flue and it is clear, the 86mm restrict or plate is fitted as required and there is plenty off room around the...
Good evening
Im fitting a new heating system in my house, im gas registered so all well there.
what I would like to do is add my multi fuel burner. Ive plumbed a few mf burners in & fully understand the regs & complications. Will a low loss header added to the mf side allow me to link into...
Gents,
I hope this is the correct forum.
The situation I have is that, as an afterthought, a customer would like to place a multi fuel stove in a corner of a room, within a single storey barn conversion.
One wall is an external wall of brick and block construction. It will be cement rendered...
So my mate has a Bosch Multitool
Maybe 10.8v? Not sure in that, defo not 18v
Saw him using it & I wasn't that impressed
Anyone have a battery one that's good?
I know people are Fein fans.
Just thought I'd ask
Thx
So got sent back today.
Tested the temperature sensors 10 - 15 kohms = ok
Brand new flow turbine = no change
Removed combustion chamber and burner and cleaned.
Removed water inlet filter and cleaned - lots of hard build up and seemed to slightly improve operation, now will run for as long as 2...
Hi guys
been sent to this property a few times
Their water heater keeps playing up, until today when ever i have been there it has been working fine. Today I got sent there and it would light for a few seconds then go off, relight then go off and so on. About 2 months ago we upgraded the gas...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.