Can't get tap head off!

[Toxic Ted]

Yea, some of it has went downhill must admit! :smile:
Not really my Guinness - as I am from NI, but it is good though!
Seriously, I drink a lot of filtered tap water as it is so good, even unfiltered here.

I dive in Scotland quite a lot and always have trouble getting rid of the soap after a shower.......i don't tend to drink our water too often as i think its been recycled too many times for my liking.....

 

[Best]

I dive in Scotland quite a lot and always have trouble getting rid of the soap after a shower.......i don't tend to drink our water too often as i think its been recycled too many times for my liking.....

The water we drink, - from whatever source, has likely been recycling through people's bodies for thousands of years - or even part of people's bodies as we are supposed to be mostly water, when you think of it!
Just as long as it doesn't contain anything else!

 

[acecharly]

I do love this forum, its fascinating how help on fixing a tap can turn into one about diving in a lock, the quality of stout and guiness and showering afterwards, and now where the water we drink today was being urinated a 1000 years ago......marvelous im wondering if by page 5 we will be disscussing which comet it came to earth by in the first place lol

 

[galaxy_plumbing]

there won't a page 5

 

[PlumbersMate]

Quick question, I've had times where I've used the revived kit on taps, put new body in, everything's fine so I leave. customer rings back 5 mins later and the taps won't open anymore? What's happened?
has this probably 5 times now

 

[AlexGas]

Drill it out…
Get a grinder and chop the knob off, replace the valves and knobs…
Invest in new taps…

It’s your call!

 

[Best]

Quick question, I've had times where I've used the revived kit on taps, put new body in, everything's fine so I leave. customer rings back 5 mins later and the taps won't open anymore? What's happened?
has this probably 5 times now

If you mean the new tap works won't open & let water out, then that's simply because the new works are not deep enough & came apart when someone turns the new works tight down.
Use the brass spacers supplied with some of the reviver kits, or just replace whole tap.