You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
mira
Mira (), designation Omicron Ceti (ο Ceti, abbreviated Omicron Cet, ο Cet), is a red-giant star estimated to be 200–400 light-years from the Sun in the constellation Cetus.
ο Ceti is a binary stellar system, consisting of a variable red giant (Mira A) along with a white dwarf companion (Mira B). Mira A is a pulsating variable star and was the first non-supernova variable star discovered, with the possible exception of Algol. It is the prototype of the Mira variables.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT.
THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE.
THANKS
I done a straight change from a thermostatic shower to a new mira atom shower,when I run the shower in an upstairs ensuite it runs hot for a few seconds then goes back luke warm,I have a combi boiler,any advice please??.
Hi Everyone,
Does anyone know where to find out what size the O rings are in a Mira 723 service kit as I have one (at the pointy end of the piston/spindle) that keeps failing and I cannot afford to keep spending £23 to get one O ring. It is part "G" on the 723 instructions. Any help very...
Years ago I installed a Miral excel 1990's thermostatic mixer. It was an ugly thing compared to todays standards, but it had the advantage of the option to orientate the feed pipe upwards, downwards or backwards as the main body was screwed to the wall. Is there a modern equivalent?
The reason I...
Hi all,
Appreciate any help here. I called Mira who advise that they can't support this shower any longer.
The shower works intermittently. Sometimes the light on the control unit does not light up, and will not switch the shower on. This can be for 24 hours, or can be 1 week.
This is the shower...
I’m after some advice.
I’ve inherited my parents house. In the process of doing it up.
My dad got a Mira combiflow installed about 15 years ago. Over the last couple of months every so often when it’s turned on the water runs ice cold even if I turn the handle to hottest temp. All other taps...
Mira shower head.
Does anyone know anything about this shower head (I will post pics)
Its gotten a bit dishevelled, does it come apart easily & then just unscrew to replace with a different one ?
Hi,
I'm hoping you can tell me the main differences between:
Mira Digital Activate Shower & Mira Digital Platinum Shower
and also the main differences between:
Mira Opero Mixer Shower & Mira Evoco Mixer Shower
I've scoured the internet but a lot of it is just marketing waffle and can't seem...
Is there a direct drop-in replacement for a Mira 8 exposed shower mixer valve? My father-in-law says it was fitted 30 years ago. Spares no longer available. The critical dimension is the gap between the nuts that attach to each side of the valve body. Has anyone done this replacement?
Hello, looking for advice on this please, general direction of where to look. We have an unvented Megaflo and the pressure and temperature is perfect in every other shower and tap except this one. Think it's a Mira Select BIV but the name has rubbed off. Any pointers as to where I should start...
Hi guys , I want to install a Mira digital shower,
Gravity fed system I have the correct shower, my cylinder is downstairs but I currently have an old type electric shower HOT and COLD fed from the loft on isolators .
there's limited space in the attic to get to the tank but it looks like the...
About to install a new Mira Platinum on a gravity fed system. The Installation Manual shows the pipework from top of hot water tank coming off at 45 degrees. Can I just T off the existing horizontal hot water pipe at top of hot water tank or even from the vertical pipe going down the back of the...
We have just had our second Mira shower tray 1700 x 900 fitted the last one cracked and my replaced.
my husband was having a shower today. He heard a very loud crack and felt it nothing visible. It’s similar to when you would have been walking on a ice like when you hear a crack, and it makes...
Hi, I am looking to install a Mira flight shower tray 760 by 760. I would have like to have removed the existing floorboards and installed battens and 18mm ply level with the joists. However, there is a stud wall running parallel to the joists sitting on top of the floorboards preventing me from...
Hi guys, new to this forum, was looking for advice regarding a mira flight shower tray i've just installed [diy]. After installing it, and then taking a shower, i noticed that the water was collecting at the edges and not dispersing away after a period of time.
Now this tray was a replacement...
Hi, Need a bit of advice on getting to the inlet filters on a Mira Excel i think 2010 version
I've read and watched lots of advice on doing this ,
Remove the temp control knob
Remove the Flow lever
Remove another ring, which shows the cartridge
Unscrew 4 screws (took a bit of cleaning to...
Mira Silver EV shower cartridge fail.
Can anyone suggest why the cartridge fails after 9 to 12 months (starts to drip). Seal kit doesn’t work, tired of buying new cartridge at £130 a pop.
H/W is from a Combi boiler.
My step-daughter bought a 50's end-terraced house at the start of the year, and found there was a leak from Mira bar shower that was coming through the bedroom wall from the bathroom on the other side of the wall. The shower is over the bath and the bathroom walls are tiled around three sides of...
Hi, I wonder if any body could shed some light on my problem?
I have a Mira Atom ERD. Which had never been amazing with temperature, I have to have it turned right to max for the temp to be warm enough now it has developed a drip form the temperature control side of the bar mixer, i though the...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.