You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
stud
A stud farm or stud in animal husbandry is an establishment for selective breeding of livestock. The word "stud" comes from the Old English stod meaning "herd of horses, place where horses are kept for breeding". Historically, documentation of the breedings that occur on a stud farm leads to the development of a stud book. Male animals made available for breeding to outside female animals are said to be "standing at stud", or at "stud service", referencing the relatively high probability that they are kept at a stud farm.
The word stud is often restricted to larger domesticated (especially farm) animals, such as cattle and horses. A specialized vocabulary exists for the studs of other animals, such as kennel (dog), cattery (cat) and aviary (birds).
Hi.
I moved in to a new build home and 3 years later (after the builders warranty expires) the boiler is slipping off the wall at one side.
This is putting pressure on the flue. Not something Iām happy with.
Does anyone know the guidelines on how they should be fitted? I want to prove they...
Renovating an upstairs bathroom. Void between floor boards and ceiling below is too narrow to hide the waste pipe from a wall hanging toilet.
My plan is to build stud wall with sufficient width to hide the 100mm toilet waste pipe into the existing stack. In practice this means extending the...
Hello all,
This is a follow-up to this post: Fit wall-hung toilet to inside stud wall? - https://www.plumbersforums.net/threads/fit-wall-hung-toilet-to-inside-stud-wall.127877/.
I'd like to fit a cistern into a stud wall, which is 100mm wide. Typically, the dimensions of the toilet fixing...
Hello all,
We have a small bathroom, which currently has the toilet on the outside wall, and the sink on the inside wall. What are the chances/challenges of switching this round, i.e., fitting the toilet to the inside wall?
Here's what I mean:
So toilet would be hung from the stud wall, with...
Hi, I have an internal, decorated plasterboard wall with poor studding: from left to right, there is a 22mm wide (i.e., horizontally parallel to the wall) stud, then a 38mm stud (the two studs are spaced 60cm), then the jack stud of the door.
I need to hang a ~2500 BTUs radiator (I have gas...
I'm thinking of getting a Stud Finder, so that when I drill or nail something into a wall at home, I don't puncture any pipes, wires etc.
I heard that cheap ones aren't good, not sure if this is true.
Any recommendations would be very welcome š
Just a quick one. I have to fit 15mm copper pipe [H+C] into an internal plasterboard cavity wall which is just insulated with rockwool. Will be lucky if the length of copper pipes in the cavity be around 1 meter in length to the drop in the floor.
The question is do i have to put anything...
We are renovating our house and after a lot of playing around I have worked out the best floorplan for upstairs. It means the only place I can fit our ensuite is in the middle of the house, the toilet will be 2.7m from the main soil stack in the family bathroom. It is in a straight line and I...
Hi, our doer upper currently has radiators that have been fitted with pipes running down the walls. We would like them to be hidden in the stud walls. Reading up, some people say use plastic, others say do it with copper. I think I'd prefer copper but would that mean my plumber would have to...
Hi
Has anyone used a stud, electric wire and pipe finder?
It looks really good but is it as great as they say? Does anyone have any experience in using them?
Thanks
Paul
came across this situation when installing flue. Metal stud in the way, can't move boiler to the left because of side wall, or right because of door opening.
Is this the way new houses are built now ? outside brick wall, insulation fixed on one side metal frame then plaster board fixed on the...
First time on the forum and looking for a bit of advice. We have converted a large workshop area attached to our house and looking to plumb in the central heating. I'm planning to put in a flow and return system with 22mm main pipe and 15mm Spurs to the radiators. The main pipes will run above...
James05
Thread
above
color
dropping
pipes
radiators
stud
through
uictfonttextstylebody
walls
I have said many times before bathrooms are not my thing BUT, I have to fit a bar mixer (the type thats supported only by the two 3/4 nuts for hot & cold) to a already tiled stud wall, the rear is accessible through the airing cupboard any suggestions on how to secure it ?
Hi all,
Can anyone recommend a decent stud / detector please? I bought a lidl one a few months ago (you get what you pay for) which is really hit and miss.
Any help appreciated.
Thank you
Does anyone know where you can buy pre cut M10 stud (40,60,80mm ish) ?
Do Geberit do a stud cutter attachment for press tools, I know REMS do?
killing grinder blades and not ending up with a very clean cut!
I have an alcove in the bathroom on wall adjoining a bedroom. This creates a step in the wall on the bedroom side that I'd like to eliminate.
I've realised that the alcove wall is the original house wall (plaster and lathe) and that the reason for the alcove was to box in the soil and pipes and...
Hi guys, I've just replaced the standard drain hole in our bathroom basin with a plunger type that doesn't need a plug. Having removed the plug and chain I'd like to fit a nice flat chrome stud in the chain anchor hole. I noticed that the new basin in our down stairs toilet has one, but can't...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.