Search the forum,

novice

A novice is a person who has entered a religious order and is under probation, before taking vows. A novice can also refer to a person (or animal e.g. racehorse) who is entering a profession with no prior experience.

View More On Wikipedia.org
  1. A

    Leaking cistern feed.

    Today i replaced the cistern flapper diaphram. Never done anything like this before but im fairly practicaly minded. I fitted a new o-ring kit as the toilet is a closed couple type and the original o-ring was decayed. Everything works fine now and flushes with one press of the handle;) Problem...
  2. S

    Banging Boiler

    Hi Wonder if someone could help me??? I have a problem with my boiler making banging noises. It happens when I have had the hot water on for about an hour or two following the hot water not being on for 4 or 5 days then when I run my bath the banging starts and is there constantly. I am a...
  3. J

    Connecting toilet to 15mm copper

    Hi, This is my first piece of plumbing work, so treat me as if I know nothing (which isn't far off!) I want to connect a toilet to the inlet pipe (15mm copper). I have read that a flexible connector is best, but these all look too long. I have no more than a few inches from the top of the...
  4. W

    Leaking tap under sink

    I am a novice DIYer and so I'll try and explain myself as best as I can. My wife and I have recently moved into a new house. Under the sink where the cold water pipe t's off to the washing machine, rather than having the normal valve/connector, there was a tap - like an outside tap. This was...
  5. H

    you Find open ended gas valve in landlords check

    what would you do if you Find open ended gas valve (Waterheater removed) in landlords check Just put a cap on it. problem solved or something else?
  6. V

    Vaillant 242 turbomax trouble

    Last year I had a load of grief with the vaillant turbomax 242 i've got. I took the dhw heat exchanger off and cleaned it out with vinegar to remove limescale and changed the prv. The prv is leaking again so pressure drops when the heating has been on again and I have to keep topping it up (I...
  7. U

    Water pressure to cistern

    I have a cistern with push button that has been working fine since fitted 3 yrs ago, however, today the cistern is taking ages and ages to fill. Had a look inside and water pressure entering the cistern is very, very slow, yet the pressure to taps in the house is fine - any suggestions??? When...
  8. K

    Waste pipe problems

    Hi Please bear with me as I am a complete plumbing novice but have a bit of a problem I hope you can help with. We had a new bathroom installed (by a friend of a friend - big mistake!) a few months ago and the shower has never drained properly. To get it to drain you have to fill the sink then...
  9. W

    Plastic pushfit

    Im going to sound like a right novice here but bare in mind i have no plumbing knowledge so please be gentle. My Question is this. Can you fit Plastic pushfit to copper tube? And without any trouble, Would it just be like connecting plastic pipe?
  10. A

    Hello fellow plumbers!

    Hello to one and all. I've just registered here with the hope that I'll be able to pick the brains of old experienced hands and newbies (like me). I'm about to complete a City & Guilds Level II in plumbing with a view of then going on to do unvented systems, gas and solar heating. The idea is...
  11. G

    Old LSVs - how to adjust?

    Hi guys Hope someone can help a novice out! I just want to remove a rad so that I can have the wall behind re-skimmed. The LSV looks rather old and I have not seen one like it before. I've attached a couple of pics. One shows the valve with the cover on and the other off. To get the cover...
  12. D

    Blocked drain.....rod snapped inside!!!

    Was just unblocking (trying to) a drain when the bloody rod snapped inside. There is a rubber plunger on the end and at least one length of plastic rod is stuck, I'm guessing somewhere about a 1m-1.5m from the point I started rodding. I already tied a binliner round my arm and had a fumble...
  13. S

    Gas courses

    Hi all, I have been working as a painter & decorator for a building company for the last 5 years or so. Due to having a baby on the way I was looking for a more stable and rewarding career. I have been looking at some sites for gas courses and was just wondering what the proffesionals thought of...
  14. J

    Hi everyone-total novice needs help!

    Hi all, I'm a total DIY plumbing novice. Here's hoping you can help with this problem: I have a Sanitan Edwardian style pillar tap in my bathroom basin which has become loose from the spout upwards:The style of the tap is such that there is a joint above its base.Upwards from this joint is the...
  15. W

    Novice needing help!

    Hi There, I am a complete novice so please forgive me if I say something stupid - this is my first post here and I am after a little help. We have an oil fired central heating system which fires our radiators and hot water. Last week, we stupidly ran out of oil :mad: I had more delivered and...
  16. R

    'Renewing' your business?

    Especially for the lads (and ladettes) who work for themselves, what do you see as the main barriers to getting into renewables instead of (or more realistically) along side gas/oil? I'm interested in what would make it easier, what hurdles you have encountered, training and accreditation...
  17. G

    novice tiler

    hi all,thought id join site to pick up any tips and tricks,from the plumbing side of life as a tiler.:)
  18. R

    Room Stat Installation

    Hi guys I've been asked to fit a wireless room stat to accomation with a Fagor Feb 20E combi boiler. Can I buy any wireless stat for this boiler or does it have to be a certain one? Also is it easy wiring in the recever to the boiler? Cheers Rob
  19. E

    Hi there from Ed

    Hi, New here and new to plumbing. I'm rennovating a small house and have quite a few questions about all things plumbing... I'm a novice so bear with me ! Thanks, Ed
  20. K

    moving a radiator

    I am re-boarding a bedroom wall so that i can insulate the single brick wall and need to take a radiator off the wall and then extend the pipes to the radiator to put it back on the new plasterboard wall. is this something i can do myself or do i need to get a plumber out to it? (budget is...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock