You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
makes
...And Mother Makes Three is a British sitcom shown on ITV from 27 April 1971 to 27 June 1973. Starring Wendy Craig, it was written by Peter Buchanan, Peter Robinson, Richard Waring and Carla Lane. ...And Mother Makes Three was made for the ITV network by Thames Television.
Posted here coz we're not gas safe and to keep from public eyes
No we're not going to play with it's internals :)
The cover says it's a British Gas 330+
Have to fit a thermal store and pipe this to it so we'll use it as a bi-valent heat source with the primary being a Heat pump, just wanted...
Hi,
I have a Kernel hot water cylinder system that heats hot water for my flat.
Every 20 mins or so it makes a whirring sound - it is the same sound as when a hot water tap is being run.
It sounds like the motor is running for a few seconds, then it stops.
A friend has a similar issue and...
This is tool is great for replacing bath taps. Can be found on eBay. The clip on components don't really work well but the box spanners with the ratchet work great. You can also buy box spanners for mono bloc that connect to the ratchet separately. I think it's sold now in Tool Station...
About 3 weeks ago someone put a job on for a boiler change, they wanted a worcester fitting and they wanted it done for 2k, 2 people bought it (I wasn't one of them) and now a job has come back in pretty much the same area wanting a landlord gas safety check and the gas connecting to a boiler so...
I know very little about this side of plumbing. What do you guys think are the better makers of kitchen taps. There are so many around im unsure which ones are best. Im looking for high quality taps without paying a fortune for them. Any advice would be great. Thanks
Joiner mate phoned me last week, he's doing a kitchen and laying new oak flooring in a house, could i disconnect the old sink and run a gas for the hob.
No problem. Empty house so i disconnects the sink had a look at the gas and there is a carcass behind where the new hob will be. Hunky dory...
Just bought this the other day. Oh my ffffing god!! It's absolutely awesome.
My cheap makita 18v has been on its wag out for a long time.
Most of my kit is makita. Each time a powertool dies now I'll be upgrading to better makes.
My Ddm 1 and this Hilti drill have given me the bug.
What's...
What's the crack with Honeywell 3 port valves... I put two together and the whole in the centre of the valve is pretty much the same on both 28 & 22 valves!!! Seems like a scam to me... Why run 28 all the way if there just gonna throttle it down like that!
As stated in the topic, my boiler occasionally (maybe once per hour) makes a loud, high-pitched sound. To me it sounds almost identical to a cat meowing only louder, to the point where when it first started I would go to the door to let my cat in every time it happened, lol. I'm pretty sure it's...
noisyboiler
Thread
boiler
central
central heating system
makes
oil
sound
:sad: Can anyone help? I have a (Heating is ok). The pressure drops from 2 to 1 bar but still above the red section. Sounds like a valve playing up, but I'm only an electrician so don't know my way around a boiler. Would just like to be ready with a reasonable guess when I get a plumber in. Any...
Went to an shower pump replacement quote tonight. Everything about it has been installed wrong really. Feed from CWSC taken off side of tank near ball valve instead of opposite side. No dedicated hot supply to the pump from the side of the cylinder. Bent flexi connector on hot supply side of...
Sorry guys this is abit limited but thought I may aswell post it all the same.
Was called to a job tonight, no central heating on a Ferroli condensing boiler( not sure of model).
After fiddling about with it I managed to get it going. But something isn't right with it.Has anyone had any...
3 way valve motors are they interchangable between makes as they all look the bloody same to me or are there subtle unseen differences that make them different between manufacturers. the reason i ask i have old dear with a leaky duo tec he a which blown the motor and fuses have to replace the...
I’ve got British Gas coming this week to do a boiler survey under the grant scheme. Apparently the surveyor decides on which specific boiler is going to be installed. I’ve been told that it will be one of 3 makes-Vaillant, Potterton and Ideal.
I am aware that the Ideal boiler from a couple of...
www.************/photo.php?v=1471909986366892&set=vb.452811378126236&type=2&theater
It made my nuts tighten up just watching it...........and i've done some stupid things in my time.
Hi all,
Anyone know the make/model of this flush valve so I can get a replacement? It's operated by a dual flush push button on top of the cistern.
Cheers!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.