Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
How would you classify this for a LL cert?
Good morning all, just a quick one here and i was wondering if someone could give a little...
Good afternoon all,
First time posting on this site.
I’m need of some opinions from Gas...
Morco feb 24ed3 has a f1 fault code. The burner reading is fine. The fault is intermittent...
- Question
I've had an idea to use a gas fired generator running on mains gas to top up a large off grid...
Hi, I'm hoping someone here may be able to help me out with an issue I have with my baxi duotec...
- Question
Hi! I am writing my master's thesis at university. Please help me if you know of any other...
Hi
I am looking to gain practical experience with a certified gas engineer.
I was in search...
My Zanussi gas oven has 4 gas rings and 2 gas ovens (the smaller top oven has a grill). (Model...
Our Keston k60 recently had a minor problem but was nearly written off as the gasket was almost...
We are considering buying a house which currently has a 20 year old Ideal Icos boiler, so we're...
Hi I didn't notice that the trap had water in there and when the pump came on it sucked some...
Hiya fellow gas engineer.
Need some help on this boiler fault.
Went out to this E133 Error on a...
Outside of using a gas-safe LPG engineer, do I have to notify building control for the...
Hi guys
I'm moving to a flat but where the cooker is situated. I can't get a vented extractor...
I wish to add a second boiler to my existing meter. Location 20m away. Underground run. Can l...
Good morning,
I've worked in maintenance since leaving school, I've worked in food...
Hi,
I have recently moved in to a house and in one of the kitchen units where I want to put a...
Just an update to anyone who was following the thread on this site: Tify to gas engineer, what...
This is a flue from a boiler, just installed by Borthwick. We were worried that this was...
I'm looking at the above, hoping it will be a good all-purpose tool for repairing our 2 megawatt...
Dear all,
We were disconnected by our gas supplier. We have no managed to find the money to...
- Question
Hi All, what's the cost of a service for an unvented system ? (valiant boiler & mega flow...
Am I the only one struggling to find appliances' manuals online? I know it's hard enough with...
Baxi have changed their 600 and 800 ranges....they look completely different inside and out...
- Question
Anybody bought an anton pro2 to replace a v2. The gas sniffer has a different connection. Can...
Has any one come across a backplate elbow start leaking after 5 years because of a crack in it?
Hey folks,
I'm in a bit of a pickle trying to set up my hot water and central heating systems...
What are engineers opinion on Intergas, I've installed a couple of these boilers for people and...
Hi guys.
Can this hose be removed without taking the vessel out? Is there a specific tool...
Hi all. I hope you are well. Need some advice on this boiler and fault. E229. Went there and...
I am troubleshooting a gas hob where one burner is reluctant to light. When it is lit and I...
My first thought when I heard this fault a combi boiler with hot water but no heating. Was a...
If doing safety checks on a new oven. You check the fsd on the hobs are operating within...
I have a 40 year old floor standing Glow Worm 45-60 boiler (open vent )which is in a cupboard in...
Hi guys
Do you bother trying to repair hobs these days or just advise to replace?
Family...
- Locked
Hi I am a newly qualified gas engineer in Norwich and looking to gain some experience by working...
Just a quick question on common ducts for gas laundry appliances. I have recently looked at a...
We have a situation on our allotment where we have a large propane tank (free standing) inside a...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one...
Has anyone else come across this situation? I keep detecting products of combustion inside the...
I've got an inset fire which is slightly too big for the opening - the seals can't press against...
Hi,
I turned my central heating on for the first time today this year and it started to bang...
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking...
Hi everyone,
My customer has a gas fire (Gazco Logic HE fire, about 10 years old).
It's a...
[ASIDE: I did wonder if this was the best forum for this but figured as it was a boiler related...
Good morning all,
Just a quick one, ive recently been asked to fit a new fire in a property...
Best boiler replacement in Glasgow. At Xpress Boiler Solutions, we provide the best & most...
Hello, I've got a testo 327-1 that I purchased back in 2019 when I went self employed. The...
-
- Redirect
This is a link to my latest video. Lots of people have liked this video and appreciated the tip...
N/A
Tags
Newest Plumbing Threads
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 0
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 1
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0