Search the forum,

common

Power Systems is a family of server computers from IBM that are based on its Power processors. It was created in 2008 as a merger of the System p and System i product lines.

View More On Wikipedia.org
Recent contents Top users
  1. 1

    Common duct for gas and electric

    Just a quick question on common ducts for gas laundry appliances. I have recently looked at a gas ironer which shared a common duct with 2 electric dryers. I believe this isn't allowed but the manufacturer sais it's up to a risk assessment. Any ideas anyone.
  2. K

    Heatslave common parts

    Hi all, can anyone confirm to me what the difference is between a heatslave 15/19 and 20/25 physically? So the reason for the question is if I bought a second hand 20/25, could I strip it down and use most of the parts as spares on my 15/19. From what I can gather, heat exchanger plate, pump...
  3. F

    Is this a common valve?

    Hi, I’ve finally turned off the water and removed this valve from the bathroom tap (thanks from a beginner for the help so far). i need to replace this valve but I’m not sure what I’m looking for. my local diy store and Amazon are showing ceramic valves which look a bit like mine but not...
    • Freespirit
    • Thread
    • america common usa valve
    • Replies: 6
    • Forum: USA
  4. Fyodor

    Most common gas hazards in the home?

    Hi all, I've recently started working in the property sector but do not have any experience with gas. I wonder if you could chuck at me some common gas hazards you regularly find in the home? I would really like to be a bit more vigilant in this area. Many thanks
  5. B

    Common Faults

    Calling all knowledgeable plumbers.. I'm looking to join an evening college class in September, I currently work full time so unable to get proper experience beforehand so I was wondering if anyone could of advise of common plumbing faults you get called out to or reoccurring calls out. This...
    • brxd94
    • Thread
    • america common faults usa
    • Replies: 6
    • Forum: USA
  6. J

    Common faults with a Worcester LPG Junior Combi Mk5.

    Hello. My son is having trouble with the above boiler. When operating the heating above 2 on the control, it locks out. A service engineer replaced the igniter and a sensor but the problem persisted until now. It will not work at all. Any help would be gratefully received. JJ.
    • Jolly Jack
    • Thread
    • america combi common faults junior lpg usa worcester
    • Replies: 0
    • Forum: USA
  7. W

    Common or garden varierty isolation valve leaks.

    We've all taken punts on them without knowing we can turn the water off upstream, no doubt. If any of you have never taken that risk I am impressed. But as a low-rent jobber, grabbing at any dregs of jobs he's offered I do it all the time. When you get unlucky and it keeps weeping despite...
  8. B

    Common return off 2 separate systems??

    Hi guys. I am putting in 2 altherma heating system into a house. We need 5 pipes from the plantroom to the house however the plumber has only put in 4 pipes. Would it be possible to have a common return off the upstairs and downstairs systems returning to 2 low loss headers in the plantroom. The...
  9. L

    New Member, Common Problem!

    Good afternoon, I'm new to this forum, I'm not a professional, more a DIYer but, as usual, many jobs are outwith the ability of someone like myself so it's interesting and revealing to read through the wealth of information that the forum contains. Very useful place - well done! I have the...
  10. Stanios

    Common Problem

    Hi guys, I am coming across this same problem time and time again on combis old and not so old. In hot water mode boiler runs full rate then anywhere from 5 to 30 seconds later the flame goes out, any temperature on display goes mega high pump runs untill temp drop then relights 5 sec later and...
  11. B

    Hive smart thermostat install

    Hi I have bought a hive thermostat and just wanted to make sure fitting the receiver right I have a saunier deval combi with White wire hanging down if I put a switch spare with 3amp to live& Neutral then does the wire from boiler go in 2&3 i don't need a common wire ??? thanks
  12. T

    Are there common thread sizes for tap spouts?

    Have 2 basin taps I want to attach a shower hose to. Have unscrewed to aerators which are both plastic. The diameter of the thread seems to be 15mm (Poss 16) The tap spout has a female thread, which is what I want to connect to. Is there any place that sells adapters? Unfortunately, changing...
  13. W

    Is this becoming more common or just my imagination?

    As a disclaimer I just do small maintenance in wet plumbing. So I'm a bit limited in overall knowledge and skillset and will get lost if things get overly technical. When I started 6 or so years ago everyone seemed either to have a combi for heating and domestic hot or a vented system with a...
  14. M

    detector

    i have got a Regin premier REGX75 sniffa plus combustible gas detector but no instructions can t find them anywhere on the web does anyone know how to use them
  15. cr0ft

    Finally booked my gas assessments!

    The week after next. Very nervous about them! Doing the standard group for domestic work plus MET1. Any tips from people who have done them a lot more times than I?? Already got my first gas work booked for about 8 weeks time which gives me time to pass hopefully and get registered! New...
  16. M

    Most common oil nozzles.

    What nozzles do you carry and use the most. I only work on domestic and carry a few but want to have more than 1 of the most common. I do start a list and then usually lose the scrap of paper I write it on!
  17. A

    Where has common sense gone?

    Apparently now if there's a Baxi flue (we have loads on contract) that is of the new type which requires the self taper screw through the flue elbow and the screw hasn't been fitted, that means it's at risk, regardless of other factors. So the one I went to yesterday, the horizontal flue went...
  18. E

    common return on stanards pipe layout

    Hello when using a serial rather than a parallel piping system you need to fit a pressure relieve value between the feed and return on the boiler it seems the serial (second option) is more efficient and there my save gas (and thereby money) Any suggestions/advise ? thanks EBrant
  19. S

    dishwasher and washing machine common pipework

    Hi, a conundrum for you. Currently I have a washing machine which drains into a high level standpipe and trap, 32mm which goes about 2metres to an outside drain. Now, I want to add a dishwasher to this arrangement. Uprating the diameter of the pipework is the first obvious point. But can I...
    • sparkspark
    • Thread
    • common dishwasher machine pipework spigot washing washing machine
    • Replies: 3
    • Forum: Plumbing Jobs | The Job-board
  20. K

    Engineers and common sense....

    I wonder what type of engineer this guys is... Extreme Jenga: Whole building collapses after 'engineer took out the wrong brick' - Home News - UK - The Independent
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock