Search the forum,

modena

Modena (UK: , US: , Italian: [ˈmɔːdena] (listen); Modenese: Mòdna [ˈmɔdnɐ]; Etruscan: Mutna; Latin: Mutina) is a city and comune (municipality) on the south side of the Po Valley, in the Province of Modena in the Emilia-Romagna region of northern Italy.
A town, and seat of an archbishop, it is known for its car industry since the factories of the famous Italian upper-class sports car makers Ferrari, De Tomaso, Lamborghini, Pagani and Maserati are, or were, located here and all, except Lamborghini, have headquarters in the city or nearby. One of Ferrari's cars, the 360 Modena, was named after the town itself.
The University of Modena, founded in 1175 and expanded by Francesco II d'Este in 1686, focuses on economics, medicine and law, and is the second oldest athenaeum in Italy. Italian military officers are trained at the Military Academy of Modena, and partly housed in the Baroque Ducal Palace. The Biblioteca Estense houses historical volumes and 3,000 manuscripts. The Cathedral of Modena, the Torre della Ghirlandina and Piazza Grande are a UNESCO World Heritage Site since 1997.
Modena is also known in culinary circles for its production of balsamic vinegar.Famous Modenesi include Mary of Modena, the Queen consort of England and Scotland; operatic tenor Luciano Pavarotti and soprano Mirella Freni, born in Modena itself; Enzo Ferrari, eponymous founder of the Ferrari motor company; Catholic priest Gabriele Amorth; chef Massimo Bottura; comics artist Franco Bonvicini; the band Modena City Ramblers and singer-songwriter Francesco Guccini, who lived here for several decades.

View More On Wikipedia.org
  1. A

    Smeg Modena tap help please

    This Smeg Modena tap is dripping from the hot cartridge. I've got the replacement ready to go, but can't budge the square cartridge cover shown in picture. It's not clear from the parts diagram whether the cartridge cover is threaded, bayonet, or perhaps push-fit onto dowels. As I've no wish to...
  2. Ted808

    Ferrolli MODENA, 30C, HW flow rate poor.

    Oldish combi, servicing minimum, HW flow rate has decreased, check filter on incomin cold, not much in there, a tiny spec of dirt. I'm thinking heat exchanger scaled up. So, custard wants new boiler for peace of mind. What can I do to ensure that new boiler doesn't have the same issue? Flow rate...
  3. phil hair

    modena 102 lock out after 2 mins

    looking at a modena 102, it starts up and runs fine on hot water and heating, but after a min or two it locks out. found a faulty thermistor, replaced it, still locking out. could it be the venturi, im thinking that it runs fine for a little time says no? just thought the flame sensor probe...
  4. A

    Ferroli Modena 30c. Any gurus on here?

    Been to ferroli tonight. Display on boiler will show 'FH' with a demand on. Fan runs constantly. Pump will pulse on and off. Pressure gauges jumps in relation to this. Intermittently the boiler will light, then go out then light again then go out and give fault A01. Pump will now run...
  5. A

    Ferroli Modena A01 fault code

    Hi, I have been asked to look at a Ferroli Modena tomorrow evening. I've been text the details by a letting agent. They have requested I attend after 7pm, fine by me I have a job around the corner at 6pm. It's giving the fault code A01. It's an ignition fault. Is anyone familiar with this? I...
  6. J

    Ferroli modena 32c he - hot tap contamination

    I know these boilers don't have a good reputation but it's been reliable. I have a hot water contamination that only ever appears on the hot tap noticing it in all the hot water outlets (collecting in mixer tap filters). On a soft water feed. The flakes are non conductive and didn't desolve...
  7. K

    Ferroli Modena HW probs

    Hi, My Modena 80e has started playing up. Shower is Grohe 2000 mixer bar and the water gets hot, then after about 3 minutes goes for much cooler and then back to hot again and repeats. Burner is on all the time and I replaced both thermistors about 8 months ago due to same problem and the...
  8. J

    Ferroli modena c30 cold Central heating

    I'll try to be specific but stick with me as I'm Welsh :) Water is fine, no problems at all. Turned the CH on last week, all was well. Turned it on today and all is not well. Firstly the temperature setting will not allow us to go past 36' C it has gone there own its own from 45. checked the...
  9. S

    Ferroli Modena 102 Boiler Keeps going into standby mode

    I had to change the water pump due to the connector burning out and was tripping my fuse box. The boiler now works for DHW and CH but once the demand stops, LED 4 flashes / goes into standby mode for 2 mins, then resets and all functions can be used again.... Any ideas what I should check? PCB...
  10. C

    Ferroli Modena 32c HE, changing from manual to heating controls

    boiler was controlled using +&- buttons on pcb display for CH, HW was on demand. Now want to control it using thermostats that control valves through the auxiliary connections on pcb. Is there any links inside boiler that need removed?
  11. N

    ferroli modena 102

    boiler will not turn off unless you turn it off at the main switch it seems to be bypassing the time clock and running ch all the time when h/w called for no probs i have disconnected time clock from boiler and boiler still doing the same
  12. M

    ferroli modena not modulating

    going to an old Modena with scalding hot water when pot is turned to minimum so suspect its not modulating.....not sure this would be a thermistor problem as the boiler continually fires when tap opened....anyone experienced this and know expected voltages at gas valve??? or how to set up the...
  13. H

    Ferroli Modena 102 bar light on constantly

    Hi Recently my boiler has stopped firing. It was giving out intermittent hot water, then cold , then Luke warm. It was still heating the rads however. But now it's stopped working all together. When you switch on, it fires for 3 or 4 seconds then stops. The bar light is constantly on, not...
  14. U

    Ferroli Modena 102 constant bar light

    Hi Recently my boiler has stopped firing. It was giving out intermittent hot water, then cold , then Luke warm. It was still heating the rads however. But now it's stopped working all together. When you switch on, it fires for 3 or 4 seconds then stops. The bar light is...
  15. Deleted member 32524

    ferroli modena 102 standard efficincy

    Hello all, Need some help with above boiler. Keeps cutting out on hot water and CH. Works fine with cover off. Thermistors test ok. Replaced venturi, no joy. Got to be an air problem but what? No blockage in flue. Thanks for the help. Duncan
  16. A

    Ferroli Modena boiler - hot water works but heating doesn't

    Hello, this is my first post on the site so I hope I have posted it in the correct category! I had a Ferroli Modena 25C HE combi boiler fitted about three to four years ago and it has not been very reliable. The gas fitter (who incidentally has been struck off the gas fitter's register) chose...
  17. B

    Ferroli Modena

    Alright guys? looking at this boiler for my mate. no heating or hot water, light comes on with demand, pump runs with heating, but no fan. Checked thermistors and they were ok so checked fan a bit more, 0v between l and n to fan, 240v between l and e to fan, 240v between n and e. i think some...
  18. Robert Tyrrell

    Modena 80E - no DHW

    This is the first one of these that I've come across so any help would be appreciated. Customer complained of no DHW and drop in pressure at the gauge. I topped it up via the filling loop and re pressurised the expansion vessel, after which it was all fine. Two days later and she's called to say...
  19. D

    Ferroli Modena 80E no central heating - strange pressure jumps!

    Hi All, This is my first post to the forum - brought on by a lack of central heating....!! We have a Ferroli Modena 80E which has been fine until recently. Central heating water pressure had been dropping recently. We'd top it up a bit, back to about 1 bar. That'd be fine for a day...
  20. L

    Prv on Modena

    Went to change pro bout a half hour ago looked like I had 2 fixed points to Rigel it free between ? Looked like heat exchanger needed lifting to make it happen am I missing some thing or does it jus slip once you loosen nuts below eg flow and discharge maybe I'm retarded I'm sure you guys will...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock