J
jase158
which grips do people use to prevent scratching TRV's or chrome fittings?
I usually use a towel, but grips go through these
I usually use a towel, but grips go through these
Discuss which grips in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
J
jase158
until some idiot has used push fit fittings with straight rad valves and valve keeps moving, then you have to put grips on valve
- Messages
- 9,322
Ah see what you mean, I don't worry about it.
- Status
Reply to which grips in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes.
For toilet I was going to go straight down...
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...