D
dm65
Open a photobucket account and link from there - we all want to see the 'progress'
Discuss Please HELP with new combi boiler , possible nightmare on my hands in the Plumbing Jobs | The Job-board area at PlumbersForums.net
It is installed and switched on but there are other jobs they should have been doing like replacing valves on radiators for thermostat valves , they didn't have them all , they were going to try and fob me off and not fit them I think , anyway because of this it gave me the perfect out , they want to come back and finish the job and expected me to sign yesterday to say I was satisfied etc..and make payment , I've refused to sign or pay anything , I've said not to come back until all is sorted with the manager / owner of the company and I have it in black and white exactly what needs done and what I'm getting .If the job hasn't been finished I doubt that gas safe will be able to do a great deal unfortunately.
They are registered yes , I don't want to name them on here but I've emailed gas safe and included pictures this morning , they are yet to contact me back . I don't know how long to wait before I should expect a reply
The company or the blokes who came to fit it ?
If the job hasn't been finished I doubt that gas safe will be able to do a great deal unfortunately.
They are registered yes , I don't want to name them on here but I've emailed gas safe and included pictures this morning , they are yet to contact me back . I don't know how long to wait before I should expect a reply
It can go on plywood no problems.
Putting Gas Safe aside for 2 seconds, that just violates common sense! How can anyone drill through a lintel like that and sleep at night.
Definitely needs reporting and putting right.
depends how much beer has been consumed.All joking apart and there be no joking about a potential life threating situation.I stick to bathroom fits and domestic plumbing ,Do fit heating but not connect gas .Its all oil round these parts ..brum
Not sure of the forum name , I actually phoned him as he has just done work for my brother , when he came around I was talking to him about it all and he said he was a member on hereWhich forum member was it Shaun? His screen name, not his real one.
The thing is because the window doesn't open and if there isn't permanent vents on the window then the being too close to window reg is fine. Like Steve said it's mostly older boilers that can be mounted onto wood. We have to do this on many occasions but even though there standard of work is terrible.
Not true, an engineer has been jailed for doing just that when it was later converted to an opening window, treat that situation as an opening and keep the distances if you dont want to be sharing a cell with mommy one day.
I think your first thing to do would be get the lintel looked at on Monday if possible as it will be weakened to the point that it will probably be useless. Also who ever came out can they give you a report of what needs doing to bring it up to standards (not necessarily to make it look good though. Then go back to the company with this and say this is what needs doing and give them a timescale to sort it (you have to give them reasonable time to sort it your local CAB will be best to advise you though). If they fail to do that then get someone else in to sort it.
Not true, an engineer has been jailed for doing just that when it was later converted to an opening window, treat that situation as an opening and keep the distances if you dont want to be sharing a cell with mommy one day.
the back boiler was removed. The system is not up and running and has been turned off as it's not safeGoing back a bit, they did remove the backboiler didnt they? its not still connected to the heating system is it?
That old cast iron heat exchanger wont cope with a pressurised system if it is still attached
Kris I know the case you are talking about, it was in gas safe mag a few months ago,
however in this case to open the window you'd have to move the boiler out of the way
Of course it is , you cant jail someone for abiding by the law thats ridiculous, you put the flue outside regs state away from an openable window, if its not openable then your abiding by the regs ,
If someone changes that windo in the future then under no circumstances can the original installer be blamed it just wouldnt stand up in a court of law, there must be something more to the case your on about lame surely,
Or new windows were fitted some time after which could be opened, wasn`t it a hotel or B+B?
Not at all , just you , honestly though thanks for all of the help from you and the forum guys and girls ,if any are girlsmmmm. This one is an absolute nightmare for you.
I just hope you don't feel we're all like that.
Reply to Please HELP with new combi boiler , possible nightmare on my hands in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.