Search the forum,

Discuss Ideal Classic - is there something wrong with the flame? in the Central Heating Forum area at PlumbersForums.net

Messages
63
Hi, my first post. I have an Ideal Classic FF230 which has been noisy for a while but recently has gone a little quiet. It used to make a noise which seemed like the fan was going but that seems to have gone. Now the burner shows a mix of orange with the blue flame and there seems to be red bits burning at the bottom. Is this anything to be concerned about? The boiler is 22 years old. Thanks for any input.
 

Attachments

  • Boiler.mp4
    2.7 MB
It was serviced 6 months ago. Surely it cannot need another one in such a short time? Or can it? Thanks
It's dirty mate you can see that through the flame picture window it needs stripping down cleaning and the gas pressure checking at the burner a full service not just a safety check . Kop
 
Last edited:

Reply to Ideal Classic - is there something wrong with the flame? in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
239
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
263
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
231
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
243
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock