Discuss Can I fit a power shower to this system?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Phil

Plumbers Arms member
Plumber
Messages
4,239
Good mornings,

I'm in the middle of quoting my first Power Shower, the customer has his heart set on a Mira Event XS Thermostatic to replace the old thermo mixer unit.
Its a bungalow, dedicated tank feed hot/cold (proven), good pressure, hot water cylinder and cold water storage cylinder of the correct size (downloaded the instructions), the HTSC is in the next room across the hall from the bathroom, I haven't seen the pipe configuration around the top of the HWSC yet but I'll have a look when I'm there tomorrow.
Basically I've never fitted a power shower before but I've spent the morning researching the installation and as far as I know this shower should work fine, but is there anything I need to be aware of, or anything else I've missed.
 
Yep I've accounted for that, to spur off an existing ring main for power shower I need part P - yes??
 
yes you need part P, do you have part p? if you get stuck let me know and i will come over one evening
 
Cheers Uug- much appreciated,

I had a look in the airing cupboard and the cold supply from the cold water storage cistern in the loft to the shower is installed in the correct way as per the instructions (to avoid airlock) but its in 15mm.

The hot is 22mm from the copper cylinder to the shower and does not have a surrey flange/fitting.
Should these both be in 22mm for a power shower?, the customer was more than happy with the pressure/temp from the old shower (when it was working!) the old shower was thermoatatic mixer.

Also the pump in a power shower, is it like a central heating pump - an impeller (which moves water around rather than pumps) or does it physically 'suck' water from the tank like a straw??

Thanks for any replys
 
All about tadalis

Get cialis. seek tadalafil. Where can I buy cialis get tadalafil online without prescrption?
 
Status
Not open for further replies.

Reply to Can I fit a power shower to this system?? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, and thanks for taking the time to read. I'm trying to work out if the idea I have is practical? The water pressure in my newly renovated...
Replies
3
Views
452
I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied...
Replies
4
Views
670
We have a gravity fed hot water system in our the house we have just recently moved into. It works fine with the downstairs shower, however we are...
Replies
15
Views
797
I have just purchased a Mira digital pumped shower This will fit above an existing bath. Can I use a T from the 22 mm bath feeds to connect the...
Replies
6
Views
815
Hi all, I've been researching and planning a job for my home the past few days and a few pieces of advice would be welcome to help me along the...
Replies
5
Views
2K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock