Hi my triton shower suddenly had no water coming out after Thames water doing work outside my house, the shower just started buzzing with no water at all, after testing an hour later water is dribbling from where the hose connects, please can anyone help what they think could have failed and is...
My builder has fitted 14 Triton Showers to a block of flats which I let out, they are manager by a letting agent, I am now getting complaints that the pressure relive valve is operating and the agent informs the Plummer who changes £80 to fit a new £5 pressure relive valve
HOW CAN I modify...
Hi all. Sorry I'm not a plumber so go easy on me. I have a triton shower (see images) below, I don't know the model as it was here before me. Basically you have to turn the handle anto clockwise for hot water, off is the 6 o'clock position. However the handle will only go as far as between 12...
Hi, I had a Madrid 2 Triton shower, I had it for 6 years then one day it started to run cold, so I purchased a Triton Seville shower and changed them over, that was running great for 3 days and now that has gone freezing cold, any advice? Thank you
Hi Guys Im on my third T100XR in quick sucession. The water heaters start kettling, making a banging noise. This happens after about 12 to 18 months of domestic use. Triton say they have never heard of the issue, probably as they would.
We are in a soft water area, mains pressure is good, and...
I have an old Aqualisa A2 processor and am doing a refit. I would like to add a digital diverter, but not sure if they are compatible. So first question... Is a digital diverter compatible with an Aqualisa Quartz A2 (pumped - gravity fed).
I have a feeling it's not, and I don't have the funds...
Morning,
We installed a t80 from a t90 in December as it was the only black shower they had. Its been a diasaster as the pressure in our area is not strong enough as it runs off the mains.
We can't shower first thing in the morning usually after 9am is our best chance as it's always low...
Hello all
I'm trying to remove the thermostat cartridge on my concealed unit to service or replace it. The unit is a Triton. I believe it is a Triton Mersey but cannot be sure. The cartridge won't pull out despite considerable force, nor will the nut shaped part of the bit behind it budge. Does...
Dear Sirs,
I am looking to replace my Triton AS2000XT thermostatic shower but not with the updated SR version as this seems to have had not very good reviews which is a shame as the XT obsolete version has served me well .I have had two installed over the last ten years.I contacted my...
Hi,
The pressure release device in my Triton Aspirante shower has blown; unfortunately I can't work out how to access it to replace it
It is behind the outlet pipe and there's just not enough room to maneuver the outlet pipe around to get access.
Does anyone know how to replace it in this model?
I need advice about diagnosing why our Triton shower is stuck on max flow, with the flow control dial not responding, please.
It switched on/off ok with no leaks. The filters were clear, but there is a lot of black spot inside the whole unit. Temperature is also good
It's a Triton IPS Thermo...
Hi new member and first post. I've just installed a Triton Home digital shower (low pressure version twin outlet). Having ran the commissioning mode for several minutes I then turned the shower on but am getting hardly any water coming out the shower heads. Flow rate into the pump is c 6ltrs /...
Hi,
I recently installed a new Triton Collection 2 shower. When I went to switch the isolation cord on the shower powered up automatically and I am unable to switch it off unless i pull the isolation cord. Cold water is coming out and there are two blue flashing lights on the front panel. The...
Hi,
Hopefully someone can shine a light on this!
I have a Triton Eden Concentric Mixer Shower (shown below). For some reason the temperature control becomes increasingly stiff as you turn to the cold range, and I need to "flick" it around with a bit of force to get colder water. This has been...
We have a Triton T80 shower. When anyone runs more water in the house - such as flush WC - the temperature in the shower shoots up and is extremly hot - compared to the setting. There must be a temperature sensor/thermostat that controls temperature. This is obiously faulty. So when pressure...
Hello, our shower has started to seep a few drips from the stabiliser valve assembly (P07810800) but not from the top where the plunger is which appears to be where they can normally leak from. I've seen you can buy as gasket kit for this area.
Ours is leaking from where the temperature control...
We have a Triton Westbourne Bar Valve Mixer shower with diverter. The instructions clearly show all the components which include Push Fit Wall Brackets to attach to the pipes. The instructions also detail the installation of the wall brackets and reference that the supplied brackets come with...
This is a Triton hand wash, T30i .
Can I check whether the Element is working (or broken) using a Multimeter?
I attach a photo of the 'Can and Element assembly' unit.
Hi, just a homeowner who can decorate but that's about it. Have read a few forums about the triton t80z 9.5kw cold feed only and have ordered a new one as 5 of us use the shower every day so recon the heating filament might be knackered. I live in a hard water area. cold water in bathroom taps...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.