Discuss american fridge freezer and 3 bar pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

R

REDSAW

customer wants a fridge freezer for ice and chilled water running from header tank on a gravity mains supply?.
can you do this?/?///:willy_nilly:

another request is to tap into the bath tap 22mm pipes and connect a 3bar pump for 2 showers instead of dedicated supply via essex flange
comments?:75:
 
Last edited by a moderator:
Should make for interesting discussions when having a whiskey with ice.

On the plus side it would make checking the inhibitor concentration a lot easier.

Tee of at the top of the cylinder if the head of pressure is good enough it will work, if not how about a Surrey Flange?
 
Is that a pigeon feather in my ice cube?

My understanding is that even with a bylaw kit it is drinkable but not potable based on possible temperature change during storage. I should imagine the fridge mi's require a potable feed

Sent from my GT-I9100 using Tapatalk 2
 
No, its got a 100 gallon cold water storage tank for all 4 bathroom supplies not the headr tank.lol

Sorry Redsaw, don't know where I saw F&E in your OP the sad thing is I can't even blame the drink LOL

Not sure about regulations but if the tanks are covered it might be ok, you have the benefit of the freezer and chiller to do some purifying.

As your in the attic why not take a feed from the mains? if the pressure is too high you can always restrict it with a valve.
 
With a bylaw kit the water in the cold water storage cistern is classed as wholesome. The lagging jacket is supposed to keep the temperature down. It only becomes fluid category two in the hot water cylinder.
 
You can lag it as much as you like. Some lofts are like saunas in summer. My preference here would be to do the job with a mains feed or let someone else do it. But that's just me!

Sent from my GT-I9100 using Tapatalk 2
 
What's the flow and pressure requirements for the fridge. It will have that ridiculously small white pipe and wm valve adaptor and have to go through the internal/external filter. Tank fed might not be upto it.
 
What's the flow and pressure requirements for the fridge. It will have that ridiculously small white pipe and wm valve adaptor and have to go through the internal/external filter. Tank fed might not be upto it.

good point,
i was thinking taking it from the feed,
 

Reply to american fridge freezer and 3 bar pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Locked
I live in a modern top (third) floor flat in an all electric building. Heating is night storage and hot water provided by a vented 130 litre...
Replies
3
Views
2K
C
  • Locked
Hello all, I have been a member for a while but fresh to posting. I am a plumber with 5yrs experience, qualifications in hot and cold water and...
Replies
19
Views
3K
craigy
C
D
  • Locked
This is my first post so hello everyone. I am looking for some advice on a topic that has been bugging me for the last week. It may seem a bit...
Replies
3
Views
1K
drumste
D
P
has anyone done anything like this a bloke has got a american fridge freezer that produces ice and cold water from an outlet in the door. i have...
Replies
3
Views
5K
pauls
P
A
  • Locked
hi all, got a question, shower pump supplying hot and cold to shower, cold is dedicated supply from cwsc, hot supplied from cylinder via a surry...
Replies
9
Views
2K
adrianfs1
A
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock