You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
adaptor
An adapter or adaptor is a device that converts attributes of one electrical device or system to those of an otherwise incompatible device or system. Some modify power or signal attributes, while others merely adapt the physical form of one connector to another.
This is going to sound stupid - but it is giving me problems. I have fitted new flexible tap hoses that each connects with a tap hose adaptor to give the recommended flat surface to connect to an isolator. All good except I cannot tighten the flexible hose hex nut without twisting the hose...
Hi Oracles of all things plumbing,
I have to replace a cast iron soil stack which is simple enough, done a few up here in Scotland, however, client wants to retain the 3" toilet waste as he does not want an enlarged hole making in a newly rendered wall, which 110 to 75mm fitting is best? trying...
Hello everybody! Just a quick question and hopefully you would be able to help. I have 2 radiator pipes, coming out from plasterboard wall, those pipes was prepared to be connected to radiator, once it will be hanged. My question is: Is it acceptable to use compression elbow fittings chrome...
Hi, ive recently purchased a Sp140b adaptor for cement pipe to 110mm plastic. When I've looked the vanes end is fine to put into cement pipe but where it has described the other end as push fit I was expecting to see some kind of o ring or seal for 110mm plastic pipe to slot into. Would I be...
Hi folks, this is probably a simple thing I'm missing but I don't want to force and break anything.
i have a 7 port manifold from Underfloor Heating Manifolds c/w Iso Valves, Flow Meters, Gauges, Fill & Drain Points | VPS Underfloor Heating -...
Hello,
First post, and looking for some advice.
I had bought some Hive Radiator Valves (maybe a mistake...), but in principle the idea is excellent - control temperature of individual rooms for specific times without having to keep adjusting the valves - great when working from home.
Hive...
I'm moving to a new flat and in the meantime I've acquired a washing machine which smells rough. I thought it might be possible to hook it up to my bath tap and use a cleaning cycle to get rid of the smell.
I've unscrewed the aerator from the bath tap and I'm pretty sure it's M24x1 (male). The...
Hi all, just looking at pipework for a new en suite sink, its slightly smaller then 1 1/4 so I assume I need an adapter of sorts?
I was just about to put the waste pipe in but want to check before proceeding.
I'll try and attach a pic.
Does anyone know if you can buy an adaptor to fit on the unions of the worcester filter so you can connect magnaclense power flush machine connections ?
Hi all
Just has new radiators installed and a couple of the TRV valves are Danfoss RAS-C. Looking to get new Thermostatic heads, but not Danfoss ones. Is there an adaptor so I can fit just a regular TRV head? Thanks.
Soldered up a bunch of new pipe work to move a rad and decided to use push fit adapors on the last section where the new pipe joins the existing.
Mainly because it was my first time soldering, the area is quite tight and i struggled to get the existing pipe fully dry in order to make the joint...
I have a double sink in my kitchen which connects to the trap via a FISC Italiana adaptor which is much narrower than 3 normal 40mm fittings.
The adaptor consists of a T piece with a connector for the pipe from the washer at one end and just a 90 degree bend at the other end
I have been trying...
Hi I am trying to fit the evohome system TRV to this existing TRV but I am struggling to find the manufacturer of the existing TRV to see if they make an adapter.
Hi - apologies for the stupid question but really struggling to find the right answer (I'm a novice as you'll see).
New kitchen tap fitted with 2 flexible tap connectors. The ends (which connect to the incoming pipework) have a diameter of 22mm and have female connections.
I need to connect...
Ive got a client with an old one pipe system in steel pipe. They want a radiator put in the bathroom where pipe run runs under floor along wall. I can access short run of pipe. Was thinking of cutting pipe putting 22mm copper in cut out section with flow and return rad tap ins. Then back to old...
hi folks I'm not a plumber and I'm not proposing to do anything myself I just want some advice.
I have just got a new cooker to replace my old slot in one. The old one had a lip at the back and space for the hose/gas pipe, this on has a flat back and stands proud of kitchen units. Ive used the...
Hi guys,
Got a leak from a joint - bathroom sink pipe to soil stack.
Access is only from below, unless I want to make a hole in a tiled sloping roof.:nono:
Pipe is a combined sink and bath - sink pipe comes through a breezeblock wall and there is no side to side movement, so the pipe is in a...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.