15mm isolation value to tap tail

[Kazkdp]

I looked around the forms but didn't find what I was looking for apologies if this has been asked here before.

My new tap tails seems to be the same size as my isolation value (15mm) what connector would I need to for it please?

I seen videos showing tap tails going straight in to isolation value but that's not happerning here.

Thank you!!

 

[Aquarius]

If they’re compression ended, then you will need some copper to join in between. If they’re bs/threaded at the ends, then these Tap Tail Adaptors 15mm x 1/2" - https://www.toolstation.com/tap-tail-adaptors/p14081 might be what you need.

 

[Kazkdp]

 

[Kazkdp]

My bad didn't know how to upload the pictures. This should be much better help then me talking. Thank you so much for your time. Really appreciate it.

 

[ShaunCorbs]

Yep need the above fitting

 

[Kazkdp]

Thanks. Thank you so much!!

 

[Kazkdp]

Hi guys so I picked the ones linked above this morning and they didn't fit. I'm guessing now the tap tails are little different to standard ones. Having looked at the Amazon page my package should have included " 2x 3/8 to 1/2 adapter"

I'm not sure what that means but is thia what I needed to make the connection? I have emailed the seller but now have to wait, just wanted to make sure as kinda desperate currently and don't mind picking it up from the local parts store again. Thanks a million.

 

[JCplumb]

Tap Tail Adaptors

These two tap tail adaptors give you the connections you need to fit your flexible tap tails with 15 mm isolation valves. The helical screw threads fix tightly onto the tap tail to make installation easy. The small size ensures you save space around the fitting and simplifies your set-up. The...

www.toolstation.com

is what you need

 

[casaco]

View attachment 60758

Just take the nut and the olive off the end which the arrow is pointing to, file the end of the valve so you have a decent landing edge and fasten the hose to the valve, Make sure landing edge is level. You can buy a valve with the landing edge already machined.

 

[ShaunCorbs]

Just take the nut and the olive off the end which the arrow is pointing to, file the end of the valve so you have a decent landing edge and fasten the hose to the valve, Make sure landing edge is level. You can buy a valve with the landing edge already machined.

It’s 3/8 not 1/2”