Search the forum,

renovation

Renovation (also called remodeling) is the process of improving a broken, damaged, or outdated structure. Renovations are typically either commercial or residential. Additionally, renovation can refer to making something new, or bringing something back to life and can apply in social contexts. For example, a community can be renovated if it is strengthened and revived.

View More On Wikipedia.org
  1. A

    GSHP on renovation project - circulation pumps?

    Hi, I have installed a Ground Source Heat Pump connected to a 120l accumulator in a renovation project. The accumulator is in turn connected to the original radiators which are 2x oversize at 40C MWT with TRVs, utilising an Alpha 2 15/50 pump set to adaptive setting 2 (for rads) There is a...
  2. C

    Underfloor heating advice for renovation

    I'm currently renovating a property and would like some views on appropriate water ufh spec. Downstairs is a max of 63m2 downstairs on a solid floor over 100mm insulation. This equates to 4 zones but kitchen large enough to require a second circuit so this could go to 5. Probably polished...
  3. D

    Building a bath frame from my DIY bathroom renovation.

    I've got an Ideal Standard Alto bath to fit into our bathroom which has a wooden frame built in made of what looks like 2x1". The instructions say to use the L brackets on the long side to keep it tucked up against the wall and to use the feet for support. I've seen several people discussing...
  4. S

    Novice Attempting New Central Heating Install

    Hi all. First time poster and wondering if I could seek some advice. I’ve just purchased my first property a 3 Bed Semi, in need of renovation. The property currently has Electric storage radiators & a hot water cylinder. I’m planning on stripping the current system and installing a combi...
  5. K

    Automatic bypass faulty?

    I have a 5yr old Vaillaint Ecomax 622 system boiler with radiators, Megaflo cyclinder and under floor heating manifold, each controlled on a separate Honeywell valve. The system was new with the boiler (house renovation) and has MB1 in it. Recently the boiler started short cycling on the UFH...
  6. P

    Luke warm towel radiator

    Dear All Recently completed a full bathroom renovation for a customer. Included was the instalation of a heated towel rail to replace the existing rad. All fine, one happy customer except the towel rad only gets realy hot at the valve and luke warm throughout. The rad was fully vented and the...
  7. B

    Irlam blast.

    The news is full of the gas explosion in Irlam. Hopefully nobody has been seriously hurt and wishes and prayers go to those involved. But on a forum like this, I suppose its important to be interested in to what may have gone wrong, basically to learn lessons from it. The house apparently...
  8. S

    Drainage problems

    Hi, I hope someone can offer some advice regarding a drainage problem. A bit of background: I own a ground floor flat, which I lived in between 1998 and 2004. During that time, I had no problems at all with the plumbing or the drainage. In 2004, I moved out, and began renting out the flat...
  9. D

    Changing my hourly rate - please take a look if you're a plumber

    sorry answered my own question.
  10. N

    Boiler and cylinder in basement

    Hey, I've been asked to do a renovation job where they want the new boiler and unvented to go in the basement. My issue on having them down there is gettin the prv/trv pipework to the outside. Is there a way it can be done?
  11. C

    Have you heard excuses not to pay there and then !

    I guess there's no real way to ensure that someone has the means to pay before you start travelling to them, but have any of you guys had the "Oh damn, I forgot to draw some money out of the cashpoint, can you call back in a few days" or words to the same extent? If so, how did you handle it?
  12. V

    Cast Iron Bath renovation

    I have had my cast iron bath re-enamelled and hav purchased new taps for it....but, the tap holes are larger than the base of the taps. Is there a skirt or collar that I can buy to cover the tap hole? if so where from? :confused:
  13. S

    Last Heating systems works

    Hello, I share with you some of my last works ImageShack(TM) slideshow
  14. 3

    SELF BUILDERS? Come see us at HBRS in SURREY

    Hey to all the self builders, tilers, plumbers and folks interested in property renovation and maintenance as well as new build or project minded. Come and see us in SURREY at the HBRS on the weekend of 26 27 June 2010 You will find us there giving demos all weekend.... See the...
  15. S

    Soil Pipe advice in flying freehold bathroom

    Hi, I'm doing a complete renovation of my bathroom which is a "flying freehold" which means I share the soil pipe with my neighbours. Currently whenever they flush down a trout a little bit of tainted water ens up in my toilet, so after a weekend away I return to a filthy stinking toilet...
  16. D

    Tiling behind a radiator, weird pipe configuration.

    Hi all, this is my first post and i registered just to get some help with this. I have been tiling and i would like to remove the radiator so i can tile behind it, i have never done this before. I have looked at some self help videos on you tube, but am not confident that my radiator is the...
  17. A

    Gas Fire And Fire Box Fit Issue

    Hi, I wonder if anyone can help. DIY enthusiast, but early days, had new gas fire installed (by gsr plumber) as part of a renovation project. Time passed and time came to fit new surround, and met with an issue. Plinths for surround are meant to fit behind lips on the fire, one on each side...
  18. P

    burning question

    health & safety advise no use of blowtorch in the loft space. Does anyone use a blowtorch in the loft space? if not what do you prefer compression or push-fit fittings?
  19. N

    Unvented D2

    HI all just had a look at a job,new unvented cylinder to be put in cuboard in the center of a house (renovation) think it's going to be a problem getting the d2 pipe to the outside(tile floor ect) has anyone used a hepvo valve and gone into the soil and vent(happens to be close) more to the...
  20. M

    Why replace old 3" iron pipes with small copper pipes?

    What are the pro's and con's of replacing old 3" iron pipes with small copper pipes? I've just bought an old, 1929 house in the BRNO, Czech Republic and embarking on a renovation project. This house is no Wimpey build, with walls and pillars 1-2 feet thick. I'm being advised to replace the...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock