i live in a very old house, timber framed with wattle and daub walls.
i cant chase pipes into the walls nor can they go under the floor boards. So ive been thinking a micro bore system might be least intrusive? underfloor heating is also a no.
So can anybody give me a run down on how a microbore...
that bloke.
Thread
10mm
boiler
central
central heating system
cold
combi
flow
flush
installation
microbore
pipes
plumbing
power
pressurised
problem
radiators
sealed
sludge
system
underfloor
underfloor heating
wall
wide
The heat exchanger bottom plate is leaking in my Ideal Icos HE12 boiler. Apparently its not an O ring type gasket but a silicon paste and they often fail if they are stripped down and a new paste applied.
So what I want to know is can I put Fernox sealer into a microbore system or is it likely...
glynnt
Thread
air
block
blockage
boiler
corgi
fernox
icos
ideal
job
leak
leaking
microbore
seal
sealer
system
work
Hi all,
Just moved in to a new bungalow with 10 rads, most are not getting warm.
In the loft there is a 22mm loop through the boiler and pump, with Y split and 2 motorised valves.
Hot water sub loop is OK, but CH loop route is a bit weird.
There are 2 microbore manifolds, one with 14 pipes...
johnny3star
Thread
22mm
advice
boiler
bungalow
central heating system
flow
hot
hot water
loft
microbore
motorised valve
motorised valves
pipes
please
pump
radiators
sealed
sludge
system
thank you
valve
valves
water
hi do you think i could pre treat with kamco fx2 for 24 hours before power flush to speed things up or is this acid based chemical to strong?
have already tryed neutral cleaner but has left lots of scale on system visible on magnaclean twintech clear filter
thanks mark
gas1
Thread
10mm
blockage
boiler
central heating system
combi
connections
copper
flow
flush
gas
hammer
job
jobs
law
microbore
newbie
pipes
power
problem
system
vaillant
valves
water
work
I wonder if anyone can help me with what is an odd request!!! I have just finished decorating/fitting my new kitchen but wife decided she wants dishwasher. My only option is to dig the floor up (now brand new!!) or put microbore behind coving and trim around ceiling from 15mm feed pipe under...
Where are the manifolds normally located, near the boiler, under the airing cupbaord???
I believe there are normally two. one you upstairs and one down stairs.
:confused::confused::confused:
hello . i am going to install new rad on curcuit . can i have tips please on the use of micro bore as this is still in use in the property , i need to know how to manipulate it and bend it cheers
daz1968
Thread
10mm
22mm
flow
install
microbore
pipework
plug
return
tips
water
I am replacing a rad in the bathroom to a towel rail but the pipes which are microbore are buried in the concrete screed and they need moving closer together. Can i chase the pipe back and solder a extension piece in or is there more involved than that also can i step the pipe up to 15mm so i...
gates1979
Thread
bathroom
chrome
chrome pipe
concrete
fitting
floor
microbore
pipe
pipes
problem
towel rail
water
i'm going to a customer who has a blockage not able to easily replace pipe just wondering if anyone has any good tips on shifting them..... will do the obvious poke solder method and i once put scalding hot water in a injector bottle pressurised and sludge agogo
smoggs03
Thread
blockage
blocked
hot
hot water
microbore
pipe
pressurised
sludge
tips
water
Hi Guys.
Im changing two bathroom radiators for chrome towel rails. The Radiator valves are 15mm but my piping is microbore (which i think is 8mm?) how best to fit the radiators. I have no access under the floor boards to get to the pipes and very little showing above floor level . If possible...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.