Questions and plumbing advice in the Plumbers Arms - For Professional Plumbers only, with 50+ posts..

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

I struggle to get decent radiators locally. Mr central heating and Williams and co the paint...
Replies
21
Views
130
What boiler are BG fitting? Is it still WB or have the moved on, any ideas on warranty offered...
Replies
4
Views
36
https://66.media.tumblr.com/ac82a4d3c2fac75e4a56071525f8faca/109c2d64aa11d35e-a7/s400x600/62c069b...
Replies
3
Views
21
Never seen them before. I just need to cap them off as they come out the wall... What would I...
Replies
6
Views
35
The type with a twistable control that mounts on the surface? Can't find any googling around...
Replies
3
Views
21
And do I need to isolate the electrical supply/check it's dead before replacing? I'm hoping not...
Replies
11
Views
63
    • Like
Fairly typical of the old buildings in Bristol but what a mess
Replies
4
Views
35
    • Like
    • Winner
That bathroom I'm on. Said they hadn't used the shower for three years. It leaked and didn't...
Replies
4
Views
45
When I turn my kitchen hot tap on (little bit or on full, doesn't matter) it gets nice and hot...
Replies
5
Views
51
    • Like
Does anyone get fed up with calls on weekends from people wanting work done or advice. It would...
Replies
6
Views
56
    • Funny
What happened to the 'Hall of Shame'? Is it still around? Anyway this is one of the best I've...
Replies
2
Views
20
Other than bes any suggestions on where I can get 5 water meter carriers with the blanking...
Replies
1
Views
10
Aquarius
A
Hi Anyone got experiance with sizing a water main for a block of 12 flats? Im after any...
Replies
5
Views
25
I have a job with some extreme water hammer. When originally at the job, you opened a hot tap...
Replies
3
Views
17
Hi all, I'm wanting to brush up on pipe sizing for H & C water services and heating pipework...
Replies
0
Views
16
Anyone got one or do you just hire as and when its needed?
Replies
5
Views
16
Any recommendations? I have had 2 cheap ones from screw fix. They only last a month or 2 then die.
Replies
5
Views
32
Aquarius
A
Anyone here work on viessmann? Where do you get spares? Went to the 3ish year old combi and...
Replies
7
Views
33
Have to do a partial drain down on a system with a viessmann combi. It’s not a boiler...
Replies
6
Views
29
I'm looking at replacing my own boiler, and got a bit a predicament. I've got a Heat Only Glow...
Replies
4
Views
28
Installing one of these on the 15th to replace a Potterton Promax store , installation not a...
Replies
4
Views
19
    • Like
Got this bad boy fired up today bit of a faf getting into the Vito guide app for commissioning...
Replies
7
Views
36
Hi all, a friend of mine has purchased a bath screen for there shower bath. Basically it has...
Replies
6
Views
30
    • Like
Anyone interested in this? Brand new, I don’t have any use for it. £50 posted
Replies
3
Views
30
Anyone had much luck putting new parts into a cistern like this? Ideally want to take out all...
Replies
9
Views
24
Who’s vat registered Is it a massive pain? Are your accountant fees much higher? Is there lots...
Replies
17
Views
100
Hi guys. Any recommendations for specific locks to add to a Renault traffic, just to add a bit...
Replies
7
Views
51
Deleted member 120897
D
I rarely fit a heat only, 70% combis 30% systems Are the Vaillant heat only very...
Replies
24
Views
139
    • Like
Nice little project all first fixed huge open plan living area kitchen , utility room , double...
Replies
3
Views
24
I am fitting a new boiler for my sister She is obviously getting family rates so was thinking of...
Replies
3
Views
15
I have been asked to service one of these boilers 2 years old but I haven't dealt with one...
Replies
0
Views
5
What would be the lowest flow and pressure you would fit an unvented cylinder onto? Just doing a...
Replies
4
Views
15
Hi What paperwork / test sheets do you guys issue when servicing unvented hot water cylinders...
Replies
4
Views
24
Sent a video from a friend of mine who is a plumber bit new to game. Not a job of mine or one...
Replies
4
Views
18
Anyone having trouble uploading pictures to posts because I am ??? Kop
Replies
5
Views
29
  • Question
Just a quick one folks if you don’t mind. Are there any regs around the siting of a vessel...
Replies
2
Views
17
Good afternoon everyone, I'm having problems siting an unvented cylinder. The best solution I...
Replies
5
Views
26
Hi all. Any advice for what’s best in this situation please? Blowoff from cylinder comes out...
Replies
6
Views
18
Good morning chaps I have been given the task of fixing a previous installers cock up and...
Replies
4
Views
27
Best cylinders by experience please not just the cheapest.
Replies
8
Views
33
Has anyone fitted underfloor heating on an open vented system before? Any issues? TIA
Replies
3
Views
24
  • Locked
I assume the Edit still is available here? Wonder would it be possible to have the Edit facility...
Replies
7
Views
55
    • Like
    • Informative
Been using our sponsors electric underfloor heating systems on my last 2 jobs so far all worked...
Replies
0
Views
19
I have piped up lots of UFH manifolds before while subbing but I am always off to the next job...
Replies
10
Views
35
I like Danfoss Rasc2 but they are really creeping up in price. I liked drayton rt212 until they...
Replies
17
Views
111
I have done a system upgrade to a combi There is a triton LP thermostatic shower in the bathroom...
Replies
3
Views
18
I had a look at a job tonight new kitchen and conservatory revap everything being altered and...
Replies
8
Views
33
After working out of my trusty astra van for the past 5 years and a small bump oophs , i am now...
Replies
17
Views
141
Job I’m working at has had a new boiler I’m guessing vaillant or glow looking at the terminal...
Replies
6
Views
48
    • Like
Now I have your attention (we're not really meant to draw attention to ads, let alone tell...
Replies
1
Views
19
Post a New Thread / Question
OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock