Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
Hi guys,
looking for some advice on servicing as im a bit behind and tend to take a more...
Hi,
I have a balanced compartment boiler house, fitted with 3 forced draught open flued boilers...
This isn't the first time its happened and its riling and getting (politely) ticked off!
When...
Hi everyone I currently work in oil and gas industry working in North Sea and further afield...
Hi, partners grandmother has an old Ideal Mexico, floor standing heat only boiler on a gravity...
Hi I am a gas safe engineer, how do I register for this forum? So I can post a thread for...
Looking for anyone who has had issues setting up and adjusting a new Honeywell gas valve on a...
I'm looking at getting an unvented cylinder fitted but want to know if it's viable before even...
I have several baxi solos on yearly service contracts I have noticed lately they have occasional...
- Locked
I have a Glow Worm Micron 30FF and I cleaned the burner today. When I fired it up there was some...
Good day fellow plumbers.
As the title says, what do you use to extract rusty screws from...
Hi all, just this morning seem to have a new problem to us with our Rayburn. Oven and central...
Hey fellas.
I'm a gas engineer of 21 years who decided to do a degree. Thats all come to a...
Hi,
I've got a rewire job next week.
The current setup, old cast iron boiler with pump over...
I’ve been a plumber in Scotland for over 20 years and have owned my own bathroom and kitchen...
The self-certification certificate states that "....the work was carried out in accordance with...
Hi all!
Have recently finished my training and am looking for anyone who would be willing to...
I decided to inspect the inside of my Glow Worm Micron 30FF Flue by using an endoscope.
Can...
Alpha Flame Sensing Electrode part number 3.025192 required asap in Worcestershire. There is a...
Do you tend to go with the regulations in the gas safe books when installing these. Or the...
Hi, my newish boiler has started making strange noises every hour or so. i also only have 50% of...
Hi, I have 15 year old Cannon Caniston gas cooker and when I turn the tap for the biggest burner...
Vaillant Ecotec Pro 24. Hi all, we are having issues with hot water as it only stays hot for a...
Hi all,
I attended a gloworm 30cxi running on lpg today. Changed the return pipe on the heat...
HI All,
Weird problem with an FS30 CDI, The boiler does not come on when demand for heat (LR...
Hi all,
My customer needs a new water heater/boiler - preferably electric. (Getting the gas pipe...
Hi, could you help me to solve mysterious stuff happening with Ariston e-combi 38 located on the...
- Locked
I have a strange fault with a Vaillant EcoTec combi-boiler.
It's 100% reliable whenever the...
Morning all,
Currently studying to be a gas engineer.
Could someone please advise me of the...
I've recently noticed some of the 'new' baxi boilers' cases going a bit yellow and am concerned...
I am sure everyone is familiar with these and the common diaphragm replacement cure for drips...
Hello - I have a weird issue with a potterton suprima 60 with the old type of PCB with the round...
Hi All,
Wondering if someone can give me some advice.... Recently removed a healthy 30CDi...
Hi All,
I'm looking into changing my conventional boiler (Worcester 30CDi conventional) to a...
Gas fire manufacturers state final connection to the 8mm service valve must be by using rigid...
Hi I’m looking for any gas engineers vacancies in the north west if any engineers/companies can...
Hi Guys,
Got a issue with a Worcester Greenstar 28i Junior. Have replaced the expansion vessle...
Hi all. I’m just wondering whether most of you are sticking to a particular brand at the moment...
Too many ads now as i have to remove adblock anyone else getting cheesed off with this?
May...
Vaillant ecoTEC Plus 400 15kW Heat Only Boiler
I've got air in the pump and one gas engineer has...
Hi all gas engineers. While doing landlord’s gas safety , if gas hob do not have data badge or...
- Locked
Hi All
Issue with kingfisher potterton cf150.
Seems to be issue with solenoid on gas valve...
Hi guys.
I know there’s a lot of people who are happy to just chuck in a combi on every...
Hi all,
I posted a few months ago about a 'no hot water' problem, and it turned out that it...
Back in the eons of time, we used to have a massive gas boiler (feeding the house via about 2...
Have a customer with a Focal Point Colima fire and the logs and log support are missing. Focal...
I'm looking for a placement to complete my gas portfolio currently have some evidence but only...
Saw this today no sleeve required.
My anton evo2 now needs a £250 service with new oxygen and carbon monoxide sensors. My first...
Second job of the day
Called out to a Worcester HighFlow 440 with a C1 error code.
Third job...
Tags
Newest Plumbing Threads
-
What's the most convenient way for me to plumb drainage channel?
- Started by Instadeth
- Replies: 1
-
-
Y Plan central heating gets hot on hot water demand
- Started by MPGASANDPLUMBING
- Replies: 1
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 10
-
Instructions say to apply glass cement to rubber washer. Can I use silicone?
- Started by JM Tiling
- Replies: 2
-
How do I remove the copper pipe from the plastic connector?
- Started by JM Tiling
- Replies: 2
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 1