Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Two in a row on a Friday in the Gas Engineers Forum area at PlumbersForums.net

Jerry

Gas Engineer
Messages
328
Second job of the day

Called out to a Worcester HighFlow 440 with a C1 error code.

Third job of the day

Called out to a Worcester HighFlow 440 with a C1 error code. (in a loft).


Anyone else had anything like this?
 
Oddly I get same happening to me.
Someone will ring about a rare fault and then I get another identical job
 

Reply to Two in a row on a Friday in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
372
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
227
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
264
PSxxxxxx
P
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form...
Replies
4
Views
227
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
203
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock