Search the forum,

Discuss General rant thread in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Is the boiler a bit too the left of the flue hole ?? dunno i give up.
 
Do brick work from face side! Any way who said owt about bricking up? 300mm from flue.
I went to a logic on Monday lazy gits couldn't even be bothered to brick up the balanced flue hole so the put 30mm MDF board on the wall and mounted the boiler on that ffs.
 
Was working from a schedule of rates for a ha and they wanted me to supply and fit a circulating pump for 49 quid. The job was also 39 miles away.
Told them to ball lix
 
New posts
Status
Not open for further replies.

Reply to General rant thread in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi. I need a new toilet supply line but donā€™t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
189
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
138
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
231
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
894
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock