Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Done till the flooring is done then just panel
 

Attachments

  • 9870A559-AD84-495C-9450-CDA4855EAABF.jpeg
    9870A559-AD84-495C-9450-CDA4855EAABF.jpeg
    318.2 KB · Views: 25
What do you do about backflow prevention on the shower hose? Only way I was able to do it on level access showers was a chrome school board clip, or in some instances a shorter hose.

Adjust and fix the soap dish so the head doesn’t go below spill over
 
Working on 2 ensuite bathrooms on this period cottage drainage is proving a challenge alot of alterations to do and new pipe runs to install alot through triple joists ☹️. Kop
 

Attachments

  • Screenshot_20220920-070748.png
    Screenshot_20220920-070748.png
    1.1 MB · Views: 17
  • Screenshot_20220920-070954.png
    Screenshot_20220920-070954.png
    793.3 KB · Views: 16
  • Screenshot_20220920-071012.png
    Screenshot_20220920-071012.png
    799.9 KB · Views: 16
  • Screenshot_20220920-071026.png
    Screenshot_20220920-071026.png
    679.1 KB · Views: 16
  • Screenshot_20220920-070721.png
    Screenshot_20220920-070721.png
    793.6 KB · Views: 16
@king of pipes have you used / fitted novellini screens before and thoughts ?
 
Yes Shaun they are ok mate middle of the road quality wise what you after ? Size and shape ??

Just a stnd pivot alcove eg between two walls around a hun cheaper than my normal supplier
 
One for @Murdoch

8.5kw shower and someone’s extended the wiring
 

Attachments

  • 43F664AE-15E2-4427-945A-BA52DA093521.jpeg
    43F664AE-15E2-4427-945A-BA52DA093521.jpeg
    402.2 KB · Views: 38
  • 4861BE13-C38B-44A5-99C6-4FD74C6B1674.jpeg
    4861BE13-C38B-44A5-99C6-4FD74C6B1674.jpeg
    384.2 KB · Views: 26
Installing 8 rads in doctors offices
 

Attachments

  • 6EE4493A-3D30-415F-8262-3BAA11714F07.jpeg
    6EE4493A-3D30-415F-8262-3BAA11714F07.jpeg
    457.5 KB · Views: 20
Doctors blimey they aren't coming back to work are they Shaun can't have them getting a chill . 🤣🤣

:D there only allowing me sat and Sundays to do the work so maybe :D
 
Just had three days converting gravity hot to unvented in a bungalow, plus re routing all pipes in roof space ready for a loft conversion next year.
Had to move feed and expansion for heating and get it all up and running today. Left at 8.00 tonight.
50 minutes later, text message, water bubbling up through kitchen floor.
The only section of hot pipe in the concrete floor runs from under the bath and across kitchen floor to sink, and it's gone pop.

Only thing I could do tonight was turn off hot water.

But now have to fit in pulling up a real wooden floor and digging out concrete to fix the leak.

Not like I'm busy or anything. Ffs.
 
Just had three days converting gravity hot to unvented in a bungalow, plus re routing all pipes in roof space ready for a loft conversion next year.
Had to move feed and expansion for heating and get it all up and running today. Left at 8.00 tonight.
50 minutes later, text message, water bubbling up through kitchen floor.
The only section of hot pipe in the concrete floor runs from under the bath and across kitchen floor to sink, and it's gone pop.

Only thing I could do tonight was turn off hot water.

But now have to fit in pulling up a real wooden floor and digging out concrete to fix the leak.

Not like I'm busy or anything. Ffs.
Its always a risk converting to pressurised Simon I hope you covered yourself before hand mate ? Can you reroute rather than dig up and look for leaks ?? Chances are it may find the next weakness point and leak there ?? Feel for you mate. Regards kop
 
Last edited:
Its always a risk converting to pressurised Simon I hope you covered yourself before hand mate ? Can you reroute rather than dig up and look for leaks ?? Chances are it may find the next weakness point and leak there ?? Feel for you mate. Regards kop

All explained to customer beforehand, plus covered in estimate.

No chance to reroute, unfortunately, but had the plinth off under sink unit and it looks like a previous repair was done and I reckon it's the repair that's failed 🤞🤞
 
Converting a bathroom to have a walk in shower stripped out and starting the rebuild, got the Flova smartbox fitted and piped a bit tricky in a metal stud wall pipes passing through the metal uprights but have sleeved them all . Kop
 

Attachments

  • IMG_20221012_160901417_MFNR.jpg
    IMG_20221012_160901417_MFNR.jpg
    448.2 KB · Views: 19
  • IMG_20221012_172823385_MFNR.jpg
    IMG_20221012_172823385_MFNR.jpg
    336.5 KB · Views: 19
  • IMG_20221012_172840055_MFNR.jpg
    IMG_20221012_172840055_MFNR.jpg
    414.6 KB · Views: 18
  • IMG_20221012_131351465_MFNR.jpg
    IMG_20221012_131351465_MFNR.jpg
    434.9 KB · Views: 19
Converting a bathroom to have a walk in shower stripped out and starting the rebuild, got the Flova smartbox fitted and piped a bit tricky in a metal stud wall pipes passing through the metal uprights but have sleeved them all . Kop
You are brave taking them pipes across like that. One day someone will go straight through them putting a grab rail up or something and wished they'd never started 😂 Know it can't be helped sometimes.
 
That gonna be a wallboard job kop? Then at least you don’t have to try and make good that awful metal stud wall - just go over the gaps 🙂.
Have you used flova before, any good?
 
That gonna be a wallboard job kop? Then at least you don’t have to try and make good that awful metal stud wall - just go over the gaps 🙂.
Have you used flova before, any good?
Not on this one mate going to be tiled all quality stuff on this Flova shower and fixtures and fitting in bronze, 1700 x 800 slab tray that's gonna hurt 😂 10 mm frosted glass panel should look good . 👍
 

Attachments

  • Screenshot_20221012-092027.png
    Screenshot_20221012-092027.png
    125.5 KB · Views: 14
Last edited:
Got this finished off today the rest of the bathroom will be redone in the new year as I'm stacked out . Kop
 

Attachments

  • IMG_20221014_105119992_MFNR.jpg
    IMG_20221014_105119992_MFNR.jpg
    151.6 KB · Views: 11
  • IMG_20221014_114708519_MFNR.jpg
    IMG_20221014_114708519_MFNR.jpg
    124.4 KB · Views: 11
  • IMG_20221014_114738416_MFNR.jpg
    IMG_20221014_114738416_MFNR.jpg
    237.3 KB · Views: 15
On with this at the minute, they’ve lived there 55 years and never touched the bathroom. Awkward room for a layout, so done some shifting about.
 

Attachments

  • C82EA218-25AD-4E66-9377-6C42BE2A295C.jpeg
    C82EA218-25AD-4E66-9377-6C42BE2A295C.jpeg
    466.5 KB · Views: 19
  • 7422DFBD-D233-4A1B-841F-9E59E8576263.jpeg
    7422DFBD-D233-4A1B-841F-9E59E8576263.jpeg
    581.1 KB · Views: 17
  • D520408D-5C64-44A0-A69B-DB43971481E1.jpeg
    D520408D-5C64-44A0-A69B-DB43971481E1.jpeg
    514.7 KB · Views: 17
  • EECD3CAF-93A0-4D52-82A5-71E16FB8E2E4.jpeg
    EECD3CAF-93A0-4D52-82A5-71E16FB8E2E4.jpeg
    446.7 KB · Views: 22

Reply to What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
223
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
441
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
552
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock