- Messages
- 10,444
The other tiles did not kill you in the end then?
Discuss What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Ignore this. Wrong personThe other tiles did not kill you in the end then?
The other tiles did not kill you in the end then?
What do you do about backflow prevention on the shower hose? Only way I was able to do it on level access showers was a chrome school board clip, or in some instances a shorter hose.Done till the flooring is done then just panel
What do you do about backflow prevention on the shower hose? Only way I was able to do it on level access showers was a chrome school board clip, or in some instances a shorter hose.
I did get worried for a momentNo still alive and kicking.
Enjoy your well earned rest SimonHome for next 4 days, couple little bits for friday, postpone bowes from monday and salou on Tuesday for a week.
Yes Shaun they are ok mate middle of the road quality wise what you after ? Size and shape ??
Doctors blimey they aren't coming back to work are they Shaun can't have them getting a chill .
Its always a risk converting to pressurised Simon I hope you covered yourself before hand mate ? Can you reroute rather than dig up and look for leaks ?? Chances are it may find the next weakness point and leak there ?? Feel for you mate. Regards kopJust had three days converting gravity hot to unvented in a bungalow, plus re routing all pipes in roof space ready for a loft conversion next year.
Had to move feed and expansion for heating and get it all up and running today. Left at 8.00 tonight.
50 minutes later, text message, water bubbling up through kitchen floor.
The only section of hot pipe in the concrete floor runs from under the bath and across kitchen floor to sink, and it's gone pop.
Only thing I could do tonight was turn off hot water.
But now have to fit in pulling up a real wooden floor and digging out concrete to fix the leak.
Not like I'm busy or anything. Ffs.
Its always a risk converting to pressurised Simon I hope you covered yourself before hand mate ? Can you reroute rather than dig up and look for leaks ?? Chances are it may find the next weakness point and leak there ?? Feel for you mate. Regards kop
You are brave taking them pipes across like that. One day someone will go straight through them putting a grab rail up or something and wished they'd never started Know it can't be helped sometimes.Converting a bathroom to have a walk in shower stripped out and starting the rebuild, got the Flova smartbox fitted and piped a bit tricky in a metal stud wall pipes passing through the metal uprights but have sleeved them all . Kop
Not on this one mate going to be tiled all quality stuff on this Flova shower and fixtures and fitting in bronze, 1700 x 800 slab tray that's gonna hurt 10 mm frosted glass panel should look good .That gonna be a wallboard job kop? Then at least you don’t have to try and make good that awful metal stud wall - just go over the gaps .
Have you used flova before, any good?
Its well and truly leaking now budGot floors up trying to find a gas leak as wife said she could smell gas and 0.5 mbar drop on TT horrible chipboard flooring ended up cicular saw through gas pipe
Thought it was water at 1st mate the roar it made coming throughIts well and truly leaking now bud
Looks a fancy tray that, not sure if I'm keen. The dark colours show all the water marks.It fitted a treat sealed up ready for tiling tomorrow . Kop
Yes mate over a grand for the tray customer supplied everything. KopLooks a fancy tray that, not sure if I'm keen. The dark colours show all the water marks.
Reply to What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.