What kind of plastic pipe is this

[Inverness]

I'm needing a type of fitting that can join copper pipe work. The plastic pipe on radiator isn't jg or hep20. Cheers

 

[SimonG]

Any pics? Might be mlcp.

 

[king of pipes]

As above we at least need a picture it could be a number of manufacturers . Kop

 

[DuncanM]

I usually use the proper insert for the fitting I want to use and I, so far, have had no issues.

 

[rpm]

I usually use the proper insert for the fitting I want to use and I, so far, have had no issues.

You have misunderstood the Q.

 

[DuncanM]

Multilayer pipe. Doh. Graham stock them near me for uponor. If that helps.

 

[Inverness]

Here are the photos cheers

 

[SimonG]

Its mlcp. It uses adaptors for connecting onto 15mm and 22mm compression. There is an adaptor on the pipe into the trv. I bought them from plumb centre.

 

[ShaunCorbs]

what do you need to change / alter?

 

[Inverness]

For the basin I need too join a tee piece for a cold water supply, and the radiator is getting move,so I need to pull the piles through the floor then join a couplin to extend.
Any suggestions?

 

[ShaunCorbs]

Basin your fecked on won’t get a fitting in so need to open the wall up etc

As for rad you should be able to use the existing 16mm-1/2” if you can’t you can pick them up easier enough

Have a word with bhive

 

[Inverness]

Can you give details of the fittings that I need?

 

[ShaunCorbs]

Nut & Insert Adaptor 16x15mm

B-Hive Supplies is an online, customer focused, Underfloor Heating Suppliers. Plumbing Merchant servicing installers, plumbers, builders, self builders and the public. Heating Pressfit Gas

www.bhiveunderfloor.co.uk

And a decent set of cutters don’t cut all the way through spin the cutters won’t deform the pipe

 

[Multipipe Ltd]

Here are the photos cheers

Multilayer composite pipe