Discuss Viessmann Vitodens 100 Connecting hot Water tank in the DIY Plumbing Forum area at PlumbersForums.net

Messages
1
Hi,
My dad and I have used all day to connect a external water tank to our Viessmann Vitodens 100 Boiler.

For some reason the 2 hoses we have connected to the boiler neither gets hot (i believe 1 should get hot) and we are at a loss.

Is there a configuration to do on the dash, or any things we need to adjust?
 
Is it a 4 pipe system? Eg 100 system boiler
 

Reply to Viessmann Vitodens 100 Connecting hot Water tank in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
226
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
509
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
252
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
464
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
343
Back
Top