Discuss Vented water cylinder query? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
When the immersion is on or hot water through the boiler?hi guys.
On a vented cylinder if the hot water is scorching hot and it's pumping over, does it point to the cylinder stat?
I'm unsure at the moment mate, could be either?When the immersion is on or hot water through the boiler?
If the valve was stuck open; other than checking the arm isn't locked open and checking the tension of it; is there any other checks I should carry out?or port valve stuck open etc
I'm not clued up with checking electrics tbf. I don't own a multimeter it's that bad.Check if actuator moves when heat.
Check if heat is still passing through the body of the motorised valve when actuator is removed and valve spindle is turned to off position.
Check if immersion heater switch actually isolates power, plus test immersion stat
You should buy one mate. Its a must have item really.I'm not clued up with checking electrics tbf. I don't own a multimeter it's that bad.
I'm not clued up with checking electrics tbf. I don't own a multimeter it's that bad.
I have been trying to get on the Baxi course but there's such a long wait all the time.I was same as you, but now use one.
The basics are easy and even solely as a safety check to confirm no power leakage, it is essential.
Get a spark to tell you how to do the basic checks, - power, continuity, etc.
Reply to Vented water cylinder query? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.