Search the forum,

sadia

Sadia S.A. is a major Brazilian food producer that has been a subsidiary of BRF S.A. since 2009. It is among the world's leading producers of frozen foods, and is Brazil's main exporter of meat-based products.
In Portuguese the word sadia means "healthy", but the name is also an abbreviature of "Sociedade Anônima Indústria e Comércio Concórdia", with the bold letters being the letters that compose the abbreviature.Sadia was founded in Concórdia, Santa Catarina, Brazil, and has its headquarters there.
As of 2008, Sadia had about 20 industrial plants that together produced over 2.3 million tons of food including chicken, turkey, pork and beef, pasta, margarine, desserts, and other products. The company supplies over 70 thousand direct points of sale in Brazil and exports to over 100 countries.
Sadia's former chairman Luís Fernando Furlan was appointed Minister of Industry and Foreign Trade by president Luiz Inácio Lula da Silva in 2003.
In 2008, the company accrued enormous losses on the derivative market.
In 2009 the company announced a merger with its major competitor Perdigão, forming BRF - Brasil Foods (technically a takeover of Sadia by Perdigão, which already changed its corporate name to BRF - Brasil Foods S.A.).
In March 2017, BRF was revealed to have sold processed rotten meat, resulting in food scares and worldwide recalls.

View More On Wikipedia.org
Recent contents Top users
  1. M

    heatrae sadia 25l 9004010.

    Has anyone one fit or serviced one of these before; Heatrae Sadia 25l 9004010. It a 25 litre hot water storage cylinder.
  2. P

    Megaflo Heatrae Sadia Immersion Heater Replacement TSE v TSR

    I know this topic may already have been covered but I just wanted to address it again. Can someone please tell me what the difference is between the teal green thermostat and the white one? (see attached photos) I have one of each in our Megaflow, one operates the Economy 10 and the other is...
  3. T

    Danfoss TP5000 not "communicating" with Heatrae Sadia Electromax

    Danfoss TP5000 not "communicating" with Heatrae Sadia Electromax. Hi everyone, first post here, so I hope this is in the correct forum. I recently moved into a house with a Heatrae Sadia Electromax boiler, controlled by a Danfoss TP5000 thermostat. Everything seemed to be fine for the first...
    • TimBridle
    • Thread
    • america danfoss heatrae sadia usa
    • Replies: 7
    • Forum: USA
  4. P

    URGENT G3 plumber required in Birmingham for Heatrae Sadia multipoint 50 repair

    Hi, Looking for a G3 qualified and experienced plumber to take a look at one of our Heatrae Sadia multipoint 50 units sited above ceiling in office toilets,we have an issue were there is constant running water through the tundish. B31 area. cheers
  5. M

    Heatrae Sadia Megaflo alternative.

    Hi all. I’ve got a 250i unvented HW cylinder on back order for 10 weeks and it doesn’t look like I’m getting it anytime soon. Looking for recommendations on good alternatives. I’ve a new EcoFit pure system just fitted and am keen on Vaillant storage cylinders, but my plumbers recommended...
    • MarkyMark46
    • Thread
    • alternative america heatrae megaflo sadia usa
    • Replies: 8
    • Forum: USA
  6. A

    Concerned about fix made to pressure on Heatrae Sadia Megaflo unvented system

    I already posted a question about this to the MyBuilder.com Ask a Tradesman section but I'm unable to post follow-up questions. Someone has kindly replied that the fix made to my system is dangerous and should be replaced and I'd appreciate it if someone here could validate this advice. I have...
  7. T

    Heatrae Sadia unvented cylinder & Tundish

    Hi All I have a Heatrae Sadia unvented cylinder... with the usual PVR on the side... which discharges to a tundish which is then connected to a 'fanny trap'. The problem - Water trickles through the tundish after about an hour or so of the hot water being heated and the pressure rises. It's...
  8. B

    HEATRAE SADIA MEGAFLO white lumps in pipework???

    Hi..changed a faulty mixer valve (TMV) under a bath and i was called back a 2 weeks later as homeowner complaining of low pressure at bath tap...so i stripped TMV down noticed hot strainer/filter choked solid with white soft residue( not a hard water area so not limescale)..just wondering if...
  9. S

    Heatre Sadia multipoint water heater

    Anything wrong with this?
  10. L

    Any alternatives to wet electric heating? Electromax Heatrae Sadia

    Could someone help please? I have just moved into a flat that uses the Heatrae Sadia Wet Electric heating system for heating and hot water. It's proving very costly at around £100 per month and it's a huge unit (about the size of a fridge freezer) that sits in the middle of my kitchen/dining...
  11. F

    Urgent Advice on Heatrae Sadia Electromax

    Hi All First post here, hello! Long story short, our central heating is not working. The demand is there however there is 4 heating lights, it goes 1,2,3,4. Stays at 4 for about 30 seconds then back down 4,3,2,1 to nothing. These lights stay orange rather than turning green Radiators are...
  12. F

    wiring a nest heat link to a heatrae sadia electromax

    In the instructions it says that the requirement for the room stat is a 2 core but obviously the heat link requires a three core, live neutral and switch live. Is it even compatible? Thanks
  13. M

    Heatrae Sadia Multipoint 10 Overheating water

    Water from the tap that this feeds is scalding hot. I've checked the Aquasystem 2 litre expansion vessel that's associated with it and there's no pressure in it. The safety valves seem ok. Would this lack of pressure in the expansion vessel cause the water to become extremely hot?
  14. A

    Heatrae sadia Immersion thread???!!!

    Ok got sent to a job today. Horizontal cylinder in the loft, leaking from immersion and going through the ceiling in to the room below. Someone had already been and told me i need a 27inch standard immersion, picked one up this morning and went to the job. Drained the cylinder and removed old...
  15. M

    Heatrae Sadia Megaflo problem

    Hi guys. Had a dripping through the discharge pipe, visible through the tundish for ages. Tried recharging the air gap to no avail. Had the 3 bar sustaining valve and 8 bar PRV valves replaced and it still done it. Forgot about it for a while, but now its actually running through the...
  16. G

    Heatrae Sadia

    Looking to convert over the sink discharge pipe on a Heatrae Sadia to a fixed tap on sink Can i extend pipe work to a fixed tap leaving the supply valve to tank constantly open or would i need to fit a header tank.
  17. R

    Heatrae Sadia Megaflow

    Hi Friends So, had a call from a custard who has one of the above in a 1st floor flat. There is no water to hot taps. She turns tap on and may run 10-15 secs then stops. Cold taps all ok, no problems. Any ideas? As I'm not G3 I'll not do it but could sub it out to someone as she's my private...
  18. A

    Water store

    Our plumber quoted for a Heatrae Sadia water store (Indirect cylinder 300l). He now says he will fit a Centre Store one and insists it is exactly the same model. He says that HS make the CS ones but dont put their badges on them so its cheaper. However, he says he isnt going to pass this cost...
  19. S

    Heatrae Sadia Megaflo pressure drop

    Excessive pressure drop in Megaflo UV Mark 1 2002 My first posting on this website and I apologise for it being a long one: A domestic hot water set up first installed in June 2002. It has given us nothing but headaches for 10 out of the last 12 years. At first it was the usual thing –...
  20. G

    Problem with Heatrae Sadia Multipoint 30

    Hi there, In one of our office buildings we have a heatrae sadia multipoint 30 heating 3 basin taps in the ladies toilets and maybe another 3 in the mens, although I'm not certain of this. I have to do water temp tests each month and the temp for these taps hardly ever goes over 40 degrees and...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock