Currently reading:
Vaillant Vertical Flue Kit (Flat Roof)

Discuss Vaillant Vertical Flue Kit (Flat Roof) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

dmheat

Gas Engineer
Messages
287
Hi all

Never fitted a vertical flue on a flat roof before, I know what parts I need but does anybody have some advice regarding the installation of the flat roof penetration collar, more specifically, ensuring its weatherproofing?

Thanks all

Dan
 
what type of flat roof material have they used??
I would price for a roofer to properly seal the slate in as then should guarantee you any call backs from leaks in roof
 
Ok, I'm a little nervous about it, but ok lol

I'll get a roofer in to seal the roof (will incorporate it into the quote), but would be fitting the vertical flue kit myself, so how do I fit the flat roof penetration collar? The flue instructions just say, "fit the collar"...wow...thanks!
 
if roof is bitumen/asphalt bed collar down using a waterproof mastic and seal down collar with more bitumen/asphalt.
for roofing felt, normal to bed collar down onto wooden subbase using mastic then refelt around the collar using fresh felt, some will just lay onto existing felt, and cover over leading to leaks.

similar for rubberised roofing felt. easiest roofing substrate is fibre glass, just clean it, mastic down and fibre glass over collar.
 
Status
Not open for further replies.

Reply to Vaillant Vertical Flue Kit (Flat Roof) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top