Printed circuit board too big to be fitted

[Gerry]

hey guys/girls just like to know if anyone has ever come across the problem I had today,picked up New circuit board for Potterton boiler went too fit and it was too big. Thought I had been given wrong board but No. phoned Baxi they said it's never happened luckily the merchants had another board and it fitted the board I had been given first time round was the correct board and serial numbers it just had not been cut there were lines where it should have been cut but hadent Boys I work with are struggling to believe it but i thought I'd see if anyone else has had this?!!

 

[townfanjon]

Gerry .... no help with boilers on here pal , unless of course you are gas safe , have spent thousands on training , courses ,ACS assessment , equipment , insurance etc etc etc etc

 

[Gerry]

Yes mate I'm gas safe registered have been for 10 years mate

 

[ShaunCorbs]

@Lou

 

[Lou]

You need to have ten posts then pm me your gsr for access to the forum

I'll have to move this thread there for now.

 

[Harvest Fields]

Lou is on it today. Good work

 

[RoryD]

I thought non GSR people couldn't get into here.

 

[ShaunCorbs]

I thought non GSR people couldn't get into here.

They can't lou moved the post after the poster posted

 

[Harvest Fields]

So I presume Gerry is not gas safe?

 

[ShaunCorbs]

So I presume Gerry is not gas safe?

He's only 5 posts in of the required 10 he might be yet