You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
pcb
DesignSpark PCB is a free electronic design automation software package for printed circuit boards. Although there is no charge for the software, the user must register with the website to unlock the program and it displays advertisements which must be acknowledged before the user can begin working.
Morning All, hoping you can help me out with some advice. I have a triton AS2000x manual power shower, we had a power cut last night after the power was switched back on around 20 minutes later I heard the shower running . It seems to be stuck in comissioning mode. So Ive turned off the power to...
Hi, I've got a ferroli 901 boiler, I initially thought the pcb was at fault so bought a new one and I'm having the same problem ( has been connected correctly), I switch the boiler on, all correct leds light up, pump starts, fan starts, pilot fires up, then it shuts down, all lights go...
Hi,
I need to replace the pcb in my vailant eco tec Pro 28 r2 boiler. I am struggling to find one with the same serial number as mine which is 0020092508. Would a pcb which has a different serial number but fits that model boiler be compatible?
Good morning. We have a 10 year old Ultracom which now very frequently thinks there's a demand for hot water, even though there isn't, so the boiler kicks into that mode, and sits there heating tap water that isn't going anywhere. Sometimes this happens if a cold tap has been used or the loo...
Ferroli optimax 25 OV
Pcb blew after turning on after pump replacement. Nothing on display blank.power on board ok. Fuse not blown? Hence Could also be ignition dcfo2.1 pcb? Could this also blow? May need to replace both?
Awaiting refurb Display board. Any advice many thanks
An engineer attended a boiler in my mothers house yesterday and he tried to convince me that turning off the boiler and turning it back on again was likely to blow the PCB. He also claimed that sometimes heating the relays on the PCB would make it work again. I spent 20 years as a field service...
Hi guys
What are the classic fault symptoms of pcb issues on baxi/potterton?
Though I can get some heating and hot water out of mine, it's still going into reset mode when I switch it in certain circumstances.
I did have pcb fault lights ta while back but now just the one red light, but...
Hi my boiler needed some replacement parts during a service, looked like it had a leak. Repairing the boiler water leaked all over the PCB, now it doesn’t work and drying it added an extra hour to the call and it’s still not fixed. I was told we may need to replace the PCB. What labour and parts...
Hi All
I'd appreciate advice on what the potential issue could be with this boiler. Its a heat only Ideal Icos 18 fitted to an open vent system
It had been switched off during the summer and had occassionally been used to heat water. Turned it one a few days ago and I could smell some...
Hi experts,
i'm looking for some advice to get to the bottom of my boiler problem.
The boiler is a Glowworm Ultimate 40FF so a traditional NOT combi boiler.
The problem is i cant get hot water.
Call for heating alone and boiler comes on and heats up the rads.
Call for hot water alone and...
Hello,
I am trying to get my Ideal Logic Heat H15 repaired.
There have been various faults appearing, with most of them pointing to the PCB.
It has been decided that the best option is to try replacing the PCB and using a refurbished part initially for testing.
The PCB used on the Heat model is...
I need some help with a Worcester Junior 28i gas boiler and I'm hoping someone here may have came across this fault before ...
I have checked the following:
240v at supply connections
All internal push on connections are correctly fitted to the PCB board
The transformer is giving the correct...
Hi i've had no heating or hot water for days now as the PCB on my boilermate 2000 is fried and i'm told it's likely because a pump has failed that then overloads it. How do I identify which pump caused the issue though as the board is badly damaged and the boilermate has 3 identical pumps?
I'm working on a Quooker Flex tap with an unreliable tap-and-twist steam control. I think its the little PCB in the tap head. I've got a replacement but I'm unsure of the process for removing and replacing the PCB. It is sandwiched between the brass core of the tap and the stainless case. It...
Hello,
I've had a string of seemingly random faults, including a leak, since a new PCB was fitted to my old boiler. The 'expert engineer' insists they're not his fault but also claims that the new PCB will put more stress on the boiler and pipework and therefore cause problems to occur. Can that...
I am having problems with my old Biasi Riva 32 He combi.
I am getting an ntc flue temp sensor lockout error code. I had a spare sensor and replaced it. The spare was used (from a previous time the boiler was throwing up error codes) but was not broken and the resistance checked out ok. The...
Evening All,
So have a Pro Exclusive 24 (made by Ideal Logic I believe). Just had a new PCB put in on the boiler as the hot water from the tap was hot and then went cold.
Now the PCB has been replaced the hot water is working but doesn’t stay boiling hot for more than around 30 secs and just...
Hello all,
I got a bit of a pickle here, my boiler has decided to pack up and my plumber can’t attend until Friday now. Boiler turns on, then just clicks, fans and pump are working, but the boiler fails to light up. I can see the red and white component (marked as 230 0207) just sparks for some...
Hi All,
Problem with a GW 18HXi reporting error F13 (PCB Fault). I've replaced all the electrolytic capacitors on the PCB, many bulging with high ESR. After reassembly the fault remains. Swapped board with a known good one and the fault remains.
Any ideas?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.