Outside tap

[Cumbria Handyma]

Believe me it is very easily do able and to as high a standard as you will get.
The same as a 10 rad heating system in one day on your own is too, with nothing to snag when its done. Some guys can some can't,

Outside tap 1/2 hour, Absolute, total, complete, utter, irrefutable, genuine, honest, reality, cobblers. Dream on people.

 

[GQuigley67]

suit yourself, that's your opinion

 

[Rickster123]

I do mine in 35 mins but then again I charge by the half hour!

 

[Destroyer2813]

Well how long does it take you then seen as we all talk complete utter irrefutable carp

 

[Cumbria Handyma]

Only in your wildest dreams.

 

[Rickster123]

Handy Andy do you work on an hourly rate by any chance?!

 

[Destroyer2813]

Thats what i was thinking APP, handyman jack of all master off none

 

[GQuigley67]

I appreciate not all would be able to be done in 30 mins but a straightforward one should take no longer

 

[Cumbria Handyma]

I do mine in 35 mins but then again I charge by the half hour!

Arrive at job. Meet customer and ask where they want the tap located. Look inside to see if there is a possible connection. Ask where the stopcock is located. Wait while they remove everything under the sink. Turns out after searching it's not there. Finally locate stopcock behinde washing machine.

Go fetch tools. Now you have 20 minutes left. Come on people, get real.

 

[GQuigley67]

so here's my scenario

fitting an outside tap in a house which no one stays in because they haven't moved in there, have been working in it for the past few weeks so know where i'm fitting it and where the pipes are, turn up with tools bish bash bosh done in no time

plus i think people are talking about the actual time spent working on it, not from the time you have arrived at the customers and had some tea and a biscuit and a conversation before you began