Search the forum,

Maybe not the best advertising!

Post new thread

Discuss Maybe not the best advertising! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I

IND_Nick

Esteemed
Gas Engineer
Messages
353
a8aa6a23c5e7b6e187dff9285be2703e.jpg

I saw this on the news, I think it is somewhere in Scotland. They do say no publicity is bad publicity. Not sure the motorist stuck behind would agree!
 
Always though Poly was quite cute, but her driving can be pretty stressful...
 
Bet the driver would have slowed down if there had been a copper:smile5: around.
 
Status
Not open for further replies.

Reply to Maybe not the best advertising! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
249
exedon2
exedon2
A
copper vs pushfit pipes
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
250
Chuck
C
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
238
Chuck
C
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Firefox
F
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
337
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Standards BS5389
Tiling Tools
Contractor Advice Forum
Electricians Talk
DIY Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock