joining blue alkathene

[sparky]

If its mdpe, personally i would cut a channel to desired position and extend with a mdpe coupler. Reduce down to copper at new position. Would lag pipework or wrap it in hairfelt, maybe use expanding foam along channel and screed over. Seen it done many a time on new builds where pipe has been brought into the wrong space.

 

[Gray0689]

If its mdpe, personally i would cut a channel to desired position and extend with a mdpe coupler. Reduce down to copper at new position. Would lag pipework or wrap it in hairfelt, maybe use expanding foam along channel and screed over. Seen it done many a time on new builds where pipe has been brought into the wrong space.

So have I sparky

 

[Gray0689]

Over here in NI we call it all alkathene not mdpe lol

 

[johnnyisajoiner]

If its mdpe, personally i would cut a channel to desired position and extend with a mdpe coupler. Reduce down to copper at new position. Would lag pipework or wrap it in hairfelt, maybe use expanding foam along channel and screed over. Seen it done many a time on new builds where pipe has been brought into the wrong space.

Cheers this sounds like the easiest option , thanks to all others for your input, some varied suggestions but all helpful just the same