Hints, tips & secrets of plumbing - No Banter please!

[ggman]

dont put pushfit on chrome pipe.......ever

YORKSHIRE FITTING, DO CHROME PUSHFIT, VERY NICE AND NEAT
HERE THE LINK FOR A TRAINING VIDEO container

 

[Chalked]

Souds like a description from the Viz profanasourus!

Sorry I didn't see the no banter on the title.!!

back to topic

 

[sputnick]

Never trust that the apprentice has turned draincock off on a rad before filling system, check to make sure they haven't turned it fully on!

 

[oily face]

when our pipe slices get less effective at cutting copper put some flux over night it stiffens them up and they will work better

 

[Gas]

Physics doesn't even correlate to that making sense oily face, heat activated flux, acid based?

Explain if you would, thanks

 

[Kyle87]

when our pipe slices get less effective at cutting copper put some flux over night it stiffens them up and they will work better

When my pipe slice gets less effective I put a new wheel in it!!

 

[CXR100]

or just book a new one out to the next job, and give the crap ones to the apprenticce !!

 

[Phil]

As cold weather is here never leave any batteries in your van or the cold wont do them any good...even things like digital thermometer...inspection cameras..AA's etc. Also things like silicone in the really freezing nights should be brought it.

 

[swsv1]

when working in a cramped space and you can't find that screwdriver/spanner/tape you were just using, your usually sitting on it.

 

[Bunker]

If you've had a curry the night before and are carrying excess wind, take your hoover into work and boff into that. Dilutes the exhaust a treat.