Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Copper tap tails for monobloc

Thread starter Plumb Tidy
Start date Oct 18, 2020
Replies 1
Views 1K
america copper monobloc tails tap tap tails usa

Discuss Copper tap tails for monobloc in the USA area at PlumbersForums.net

Plumb Tidy

Gas Engineer

Oct 18, 2020

Hi lads just a quick one, can you fit isolation valves straight onto monobloc copper tap tails. I know they are soft copper i have always soldered onto them and never used compression fittings but on this job i need to fit valves on. I may even go as far as chucking push fit iso valves if need be.
Cheers.
Ben.

ShaunCorbs

Super Moderator

Staff member

S. Mod

Plumber

Gas Engineer

Subscribed

Oct 18, 2020

Yes you can no problem

Reply to Copper tap tails for monobloc in the USA area at PlumbersForums.net

Similar plumbing topics

What is correct toilet supply line

Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...

correct supply toilet

Replies: 2

Views: 233

Apr 3, 2024

ShaunCorbs

Outdoor Tap at Porch

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...

outdoor tap

Replies: 6

Views: 297

Apr 9, 2024

Dave Moore

22mm MDPE connection

I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...

22mm connection mdpe

Replies: 1

Views: 318

Apr 14, 2024

ShaunCorbs

Outdoor stopcock doesn't fully close

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...

outdoor stop cock

Replies: 3

Views: 334

Apr 19, 2024

exedon2

Towel Rail Valve Advice please (35 Characters needed.)

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...

towel rail valve

Replies: 7

Views: 256

Apr 25, 2024

Timmy D

Facebook X (Twitter) Reddit Pinterest Tumblr WhatsApp Email Link

Newest Plumbing Threads

T
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Yesterday at 4:45 PM
- Replies: 0
Bathrooms, Showers and Wetrooms
Need a reliable emergency plumbing or emergency electrician services
- Started by levi_shah
- Yesterday at 10:38 AM
- Replies: 0
UK Plumbing Forum | Plumbing Advice
M
Expansion vessel size unvented hot water
- Started by Matt0029
- Wednesday at 7:52 PM
- Replies: 2
UK Plumbing Forum | Plumbing Advice
M
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Wednesday at 6:26 PM
- Replies: 2
Bathrooms, Showers and Wetrooms
K
Where would a vent stack be in this wall
- Started by kwinch
- Wednesday at 12:35 PM
- Replies: 4
USA
M
Daryl Shower Head replacement (possibly over 30 years old)
- Started by morrig47
- Wednesday at 10:10 AM
- Replies: 0
Bathrooms, Showers and Wetrooms
L
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Tuesday at 6:15 PM
- Replies: 1
UK Plumbing Forum | Plumbing Advice

Back

Top

AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock