Discuss broken screw in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
5
my toilet pan sits on tiles , while trying to move my pan one of the screws snapped , i now have a very tiny piece of screw above floor level and the rest of the screw is stuck in the tile/floor , any advice on removing it ? , iv'e tried pliers but no joy . thanks .
 
my toilet pan sits on tiles , while trying to move my pan one of the screws snapped , i now have a very tiny piece of screw above floor level and the rest of the screw is stuck in the tile/floor , any advice on removing it ? , iv'e tried pliers but no joy . thanks .
One way if you can get a combi on it tighten up the chuck around the screw then reverse it gently out.
 
Hit it with a hammer to make it flush and re drill the hole
 

Reply to broken screw in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

hi one of the screws holding my toilet pan to the floor has broken when trying to remove it , there is only about half an inch showing , i have...
Replies
5
Views
570
Deleted member 120897
D
Hi, I have I blend valve from Nu-Heat ( they bought it from Reliance, as per attached spec). I have dismantled the valve now 3 times and...
Replies
0
Views
368
S
I tried to install a new toilet seat and I’m stuck in a process where I couldn’t loosen or tighten the screw. I also tried rotating the screw in...
Replies
2
Views
693
My bathroom Basin was installed some years ago by a professional plumber. For whatever reason, the waste was fitted using silicone rather than...
Replies
2
Views
417
Hi! Totally inexperienced DIY newbie so bear with me for descriptions! Pictures hopefully help. I’m trying to remove an unused downstairs toilet...
Replies
1
Views
293
Back
Top