Search the forum,

screws

A screw and a bolt (see Differentiation between bolt and screw below) are similar types of fastener typically made of metal and characterized by a helical ridge, called a male thread (external thread). Screws and bolts are used to fasten materials by the engagement of the screw thread with a similar female thread (internal thread) in the matching part.
Screws are often self-threading (also known as self-tapping) where the thread cuts into the material when the screw is turned, creating an internal thread that helps pull fastened materials together and prevents pull-out. There are many screws for a variety of materials; materials commonly fastened by screws include wood, sheet metal, and plastic.

View More On Wikipedia.org
  1. S

    Plasterboard and screws or plugs for blinds

    Hi guys I am putting some blinds up. Which screws/all plugs are best for plasterboard window frames ?? I've got stud detector, drills etc as other people have told me before to get a handyman on here.
  2. S

    Plasterboard frames for blind. What screws?

    I hope someone can help I'm trying to put some verticle blinds up in my new build flat. I feel the wall is plasterboard above where i need to attach the blinds rail. (Inside the frame) What screws would I need to attach this ? Below ifsa pic of one of the windoes
  3. R

    broken screw holding pan to floor

    hi one of the screws holding my toilet pan to the floor has broken when trying to remove it , there is only about half an inch showing , i have tried using pliers and pulling it while trying to turn it anticlockwise but no joy , the floor is tiled , appreciate any help/advice . thanks .
  4. T

    Advice on bath waste screws?

    Afternoon, our bath waste pipe in our rented property has started leaking slightly when we shower. We've narrowed it down to a loose screw in the centre of the plughole. My understanding is that this screw being loose means that water is able to leak out between the bath waste and the waste...
  5. S

    Leak from where tail screws into tap.

    Hi, One of the tails for our basin tap was leaking slightly; I was never sure if the leak was from the flexible or from the join to the tap. The flexible tail in question had been screwed in so tightly that the braiding was damaged in several places. A real struggle to get the old tails out, but...
  6. P

    Fitting baby belfast sink on brackets, what screws & general advice

    Hi all I've got an old baby belfast sink I want to use and I'd like to mount it on old brackets... I've done a mock installation in another part of the house just to see how secure it feels on the brackets and I'm happy with the result. If I put a lot of downward wait on the front lip of the...
  7. B

    Can you help determine how to remove old shower valve, cross handle, no screws?

    Hello. I have an old shower valve that needs replacing. No product name, or set screw. It's got a cross handle with a diverter above the handle. My plumber thought it was similar to an American Standard T0646002.002 (except cross handle not a bar) but the insides are not the same. This was in...
  8. P

    Radiator on studs on top of bricks

    I need to hang a radiator (160cm wide, 50cm high, total weight around 35kg) via two brackets to a plasterboard wall. The wall is external, so that it has studs (about 12mm deep and 50mm wide) behind the plasterboard and then bricks behind the studs. I am lucky enough to have studs in...
  9. P

    Look seat screws just spin, no access to underneath.

    I want to change over a toilet seat but have come across an issue. The screws holding the connection to the pan simply rotate, either left or right. Because of the pan design and location - I cannot access the back to see what's happening under the fitting. Image0 - the underside, no access...
  10. M

    Trying to fix leaky tap. Screws absent, so confused!?!?

    I’m trying to fix a leaking tap in my kitchen. I’ve located where the grub screw should be but it’s just an empty hole. I’m looking at it with a mirror and I can see the screw rails on the inside of the hole and at the bottom of the hole a little copper dot. I’m in a new build and this is the...
  11. H

    Gas Valve - Inlet Test Point and Burner Test Point screws

    Hello, Some advise please. Doing my gas course so I have taken a few boilers home to practise taking them apart so I can understand more how they work. For the gas valve in a Worcester boiler I got my hands on I have been trying to undo the screws for the Inlet test point and Burner test...
  12. G

    Geberit 360 fill valve not shutting off, but can't access the screws under cistern

    Hi, So I have a close coupled toilet and all the screws and everything are totally inaccessible. A few weeks ago the cistern started to leak into the pan, I've just changed the big silicone washer that's under the flush valve and the problem is still there. I'm thinking it's the diaphragm on...
  13. farouqtaj

    recommended screws in shower area

    I've removed a shower seat whilst investigating a leak. I've noticed the screws securing the seat frame have rusted (see pic). I'm interested in recommendations for screws that you would use in a shower area. I thought these were stainless steel screws but clearly not. Are stainless steel...
  14. S

    water leaking from screws top and bottom of shower cartridge

    Hi All DIY homeowner here.. I replaced the thermostatic cartridge in my shower today, but after I finished and re-opened the water mains, water started leaking out of those 2 small golden screws at the top and bottom of the cartridge (picture attached). Could anyone please kindly help me...
  15. B

    loose toilet seat, screws wont tighten

    Hello I cannot get my toilet seat to tighten. I have no access to underneath the toilet. I have taken the toilet seat off and tightened the screw, but it just keep spinning. As if the hole diameter is too big. I've tried the rubber expanding fittings and the plastic ones of similar style. Is...
  16. C

    Bathroom basin tap, no screws - help!

    Hello people. I have a leaky/dripping hot bathroom basin tap and loathe to waste a plumber’s time bringing them out to change a washer, so I’m keen to sort myself. I looked up a few guides online and was ready to go! However my basin tap has no screws, no cap to pop off, etc. to get at the...
  17. M

    Toilet seat screws won’t tighten

    Our toilet seat screws are hidden in the pan and are self tightening, however they just spin around in position and won’t tighten. Any advice please
  18. Paul Haynes

    Replacing lid on 2 button cistern - whole mechanism screws out

    Had to take the lid off to replace the inlet diaphram, but now can't replace the lid without also messing up the two button mechanism. This is not a 'normal' two button cistern, where the buttons can be removed individually, with this one (make unknown) the whole dual button bit unscrews so you...
  19. D

    Quadra waterfall bath shower mixer, two screws missing.

    Hello, I really need help on how to fix this issue, we purchased this from better bathrooms over a year ago. But recently two small screws from underneath the tap have come loose in the pic shown. This means when the tap is switched on water comes through the holes, as well as the tap. The...
  20. S

    Toilet coupling guidance rge plastic screws

    Could you guys part some of your wisdom for me, my daughter has moved into a house and the toilet inlet float is just catching the side of the cistern and sometimes does not fill. The inlet is the type where the float runs up and down the inlet mechanism. If I need to uncouple the cistern from...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock