Search the forum,

Discuss best place to get logo drawn up ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

on31ll

hi guys just needing a place that will redraw a logo that i have sketched on a piece of paper ? obviously need it in certain formats for printing and embroidery ? any of you guys used anyone ? i contacted TMS print they said it would be £30 and now i cant get back in touch just no replies to the email ! need to get thsi done sooner rather than later. cheers
 
yer was just wondering if anybody has used sombody and was cheap and reliable.
 
Im a firm believer in that but to get a logo redrawn but in a digital format surely not expensive as a standard logo ? They havent gotta do any thinking etc ?
 
Im a firm believer in that but to get a logo redrawn but in a digital format surely not expensive as a standard logo ? They havent gotta do any thinking etc ?

If it's that easy why not scan it into a digital format and use a free paint shop pro type program and modify it yourself!
 
From a previous life, I can say it would take about 30 minutes labour to vectorize a standard logo. But, like plumbing jobs, impossible to give an accurate estimate without seeing the logo.
 
I wasnt slagging off the job of the guys and gals that design logos but when i read online about like so many ideas and so many redraws for a certain price ! But i dont need that ! And i dont see anybody selling what i need sp to speak !thanks guys !
 
System3 may be able to help. He helped with mine and a leaflet design.
You can pay him in flexi's:D

Sent from my GT-I9100 using Tapatalk 2
 
Im a firm believer in that but to get a logo redrawn but in a digital format surely not expensive as a standard logo ? They havent gotta do any thinking etc ?

thats like me turning up at a house at 4am cause its flooding out the loft tank and i can turn the water off and drain it in 2 mins, but i still want my full call out fee, none of this "how much? youve only been here 2 minutes" thats right says i but its taken me 30 years to make it look this easy
 
System3 has emailed me and asked me to send over my sketch ! Really blown away by some peoples generosity on this forum ! Great bunch of gents and ladies ofcourse ! Thanks guys ! Thanks system3
 
It really wasnt ment to sound like there not worth the money or they shpuldnt get paid for the work they do just more that i dont need spany different design ideas etc i just want one redrawn and i just cpuldnt find that service !
 
System3 has emailed me and asked me to send over my sketch ! Really blown away by some peoples generosity on this forum ! Great bunch of gents and ladies ofcourse ! Thanks guys ! Thanks system3

hes the exception as hes nice, the rest of us just want to pig at you
 
Ha ha pig away ! I deserve it most of the time in some way or anpther ! Thanks guys !
 
I should also stop replying ir writting posts on my iphone ! I have fat fingers and end up spelling this wrong !
 
Status
Not open for further replies.

Reply to best place to get logo drawn up ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
252
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
196
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock