Search the forum,

Discuss 650 polypipe white waste fitting £66 in birmingham in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

stevetheplumber

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
10,619
bit of a feck up i bid and won a bulk load of fittings on ebay thinking i could collect last week but the seller had gone on holiday and they are now to far for me to collect im going to try to get them to send but if theres someone close to birmingham wants to collect i could contact them and let you have them
Plumbing Fittings | eBay good deal for someone
 
Would it help if anyone was travelling from Birmingham to London who could bring them down for you Steve?
 
thats why i bid for them and i was passing birmingham on thursday and again wednesday this week so for a short detour it was worth it it may happen that i can get them shipped and still be worth it
 
Status
Not open for further replies.

Reply to 650 polypipe white waste fitting £66 in birmingham in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
252
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
138
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
252
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
192
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock